Search news/articles
JCB Loadall 527-58 compact telescopic handler with hydrostatic transmission: service manual 9813/0200 by section with data, pressures and torque settings.
17/11/2026
26
JCB Loadall 527-58 Boom, Body and Cab: Service Manual Section B
Section B of JCB service manual 9813/0200 covers the boom, body and cab of the JCB Loadall 527-58 telescopic handler: the fork carriage, heating and air conditioning, the longitudinal load moment indicator and control system (LLMI/LLMC), the cab, fuel tank and chassis panels, the boom with its wear pads and shims, and the axle load sensor. The PDF runs to 148 pages.
17/11/2026
29
JCB Loadall 527-58 Electrics and Electronics: Service Manual Sections C and M
Sections C and M of JCB service manual 9813/0200 cover the electrical system and electronic network of the JCB Loadall 527-58 telescopic handler. The machine uses a 12 V negative earth system. The transmission, hydraulics, joystick, load moment indicator and Loadall Monitoring System (LMS) ECUs exchange data over a CAN bus, and fault codes are shown on the display or read with Servicemaster. The sections include a 25-sheet wiring diagram, harnesses, charging, alternator, battery, CAN bus, LMS, fault codes and how to work with Servicemaster. The two PDFs run to 118 and 134 pages.
17/11/2026
25
JCB Loadall 527-58 Engine: Dieselmax SD and SF, Service Manual Section K
Section K of JCB service manual 9813/0200 covers the engine of the JCB Loadall 527-58 telescopic handler. The machine is powered by a four-cylinder JCB Dieselmax with a mechanical rotary fuel injection pump, built in two versions: SD, turbocharged, and SF, turbocharged and charge-air cooled. The section includes the technical data, starting and stopping, the cold start heater, engine removal and replacement, plus the starter motor, cooling pack, coolant expansion tank, exhaust silencer, air filter vacuum switch, throttle pedal and hand throttle. The PDF runs to 66 pages.
17/11/2026
26
JCB Loadall 527-58 Brakes and Steering: Service Manual Sections G and H
Sections G and H of JCB service manual 9813/0200 cover the brakes and steering of the JCB Loadall 527-58 telescopic handler. The service brakes are oil-immersed multi-plate units in the centre of the front axle, while the park brake is a cable-operated disc brake. Steering is fully hydraulic, with 2WS, 4WS and crab modes selected either manually or automatically. The two PDFs run to 66 and 102 pages.
17/11/2026
25
JCB Loadall 527-58 Transmission and Axles: Section F of Service Manual 9813/0200
Section F of JCB service manual 9813/0200 covers the transmission of the JCB Loadall 527-58 telescopic handler and runs to 148 pages in the PDF. The machine has a hydrostatic transmission with infinitely variable speed: an axial piston hydrostatic pump on the engine supplies the drive motor, and the motor drives both axles through a transfer gearbox and propshafts. The section gives technical data for the pumps and motor in every speed version, describes the hydraulic and electrical operation of the transmission and covers pressure testing, fault finding, the axles, propshafts and speed sensors.
17/11/2026
24
JCB Loadall 527-58 Hydraulics: Section E of Service Manual 9813/0200
Section E of JCB service manual 9813/0200 covers the hydraulic system of the JCB Loadall 527-58 compact telescopic handler and runs to 140 pages in the PDF. The boom services are controlled by a 4-spool load sensing, pressure compensated control valve with proportional electro servo operation from the joystick. The section contains the hydraulic schematic, technical data and working pressures, the Smooth Ride System (SRS), the main pump, the cooling fan motor, the extension, lift, tilt and compensation rams, the hydraulic control ECU, test procedures and fault finding.
17/11/2026
19
JCB Loadall 527-58 General Data: PIN Decoding, Fuel and Torque Settings
Sections 1 and 2 of JCB service manual 9813/0200 contain the general information and the care and safety instructions for the JCB Loadall 527-58 telescopic handler: machine variants, identification from the data plates, fuel requirements, torque settings for fasteners and hydraulic connections, service tools and general procedures for safe maintenance. The two PDFs run to 62 and 38 pages.
17/11/2026
19
JCB Loadall 527-58 Routine Maintenance: Service Intervals, Oils and Capacities
Section 3 of JCB service manual 9813/0200 deals with routine maintenance of the JCB Loadall 527-58 telescopic handler: the service schedule by hours, oils, fluids and capacities, greasing points, and the checks on the engine, fuel system, hydraulics, transmission, brakes, electrics, tyres and boom wear pads. The PDF runs to 94 pages.
Showing 1 to 8 of 8 (1 Pages)
