Machinery filters: oil, fuel, air, hydraulic

Categories

07/10/2026 27

JCB JS200–JS260 Monitor Messages: What They Mean and What to Check

On JCB JS200, JS210, JS220, JS240 and JS260 tracked excavators with the AMS control system, the monitor in the cab shows the working mode, the time, gauges for oil temperature, coolant temperature and fuel level, and warnings in the message line. Each message first of all points to a real problem: low fuel or coolant, a blocked filter, overheating. But if a message stays on after the cause has been put right, the sensor, wiring or controller is at fault. Below is what each message means and what to check, based on Section C of JCB service manual 9803/6400.

07/10/2026 34

JCB JS200–JS260 Track Tension: How to Check the Sag and Adjust the Tracks

Track tension on the JCB JS200, JS210, JS220, JS240 and JS260 tracked excavators should be checked every shift. With the track raised off the ground, the gap between the underside of the track frame and the top of the track shoe at the fourth bottom roller from the front should be 275–295 mm on hard ground and 320–340 mm on soft sand and sticky clay. Tension is adjusted with grease through the valve on the track adjuster cylinder. The procedure below follows Section 3 of JCB service manual 9803/6400.

07/10/2026 22

JCB 3CX and 4CX Dipper Ram Creep: Causes, Ram Creep Tests and Repair

If the dipper of a JCB 3CX or 4CX backhoe loader drops on its own under load, there are three possible causes: a leaking piston seal in the ram, spool leakage in the excavator valve section, or a leaking auxiliary relief valve (ARV) in that section. The JCB service manual gives a test procedure that identifies the culprit before the ram is removed and stripped. Below are the test sequence, the permitted creep and the repair rules from Section E of service manual 9803/3290.

07/10/2026 29

JCB 3CX and 4CX Hydraulic Oil: HP32 or HP46, System Capacity and Changing the Oil

For the hydraulic system of JCB 3CX and 4CX backhoe loaders, the JCB service manual recommends ISO VG32 oil — JCB Hydraulic Fluid HP32 — at air temperatures below +38 °C. The more viscous ISO VG46, JCB High Performance Hydraulic Oil, is for air temperatures above +38 °C only. Machines with Advanced EasyControl joysticks need a separate all-season HV class oil, JCB Multigrade Anti Shear. The hydraulic system holds approximately 130 litres. The oil is changed every 2000 hours and the filter at every 500-hour service.

07/10/2026 33

JCB 3CX and 4CX Antifreeze: Which Coolant to Use, How Much and How to Change It

On JCB 3CX and 4CX backhoe loaders with the JCB Dieselmax engine, the coolant is renewed every two years, at the 2000-hour service. The cooling system holds 18.5 litres. The JCB service manual calls for an ethylene glycol antifreeze to ASTM D6210 with corrosion inhibitors and rules out organic acid technology (OAT) products. The standard mix is 50%, which gives protection down to −40 °C. Below we cover choosing, checking and changing the antifreeze as described in Section 3 of JCB service manual 9803/3290.

Default Name Model

HLX-8813

Hydraulic return filter 730403000484 Sunward, aftermarket

In stock

0,00 ₺

32/904200

Hydraulic suction strainer 32/904200 Teletruk, aftermarket

In stock

0,00 ₺

32/904200

Hydraulic suction strainer 32/904200 Teletruk, genuine

In stock

0,00 ₺

32/920300

Hydraulic suction strainer 32/920300, aftermarket, option 1

In stock

0,00 ₺

335/Y7275

Hydraulic suction strainer 335/Y7275 JCB 3CX/4CX, genuine

In stock

0,00 ₺

02/910965

Oil filter 02/910965 JCB, aftermarket

In stock

0,00 ₺

02/971635

Oil filter 02/971635 JCB G, aftermarket

In stock

0,00 ₺

ST10905

Oil filter 10000-59645 Perkins, aftermarket

In stock

0,00 ₺

W81180

Oil filter 129150-35170 Yanmar, aftermarket

In stock

0,00 ₺

VO21707132

Oil filter 21707132 Volvo, aftermarket

In stock

0,00 ₺

P554004

Oil filter 21707133 Volvo D13, aftermarket

In stock

0,00 ₺

P550639

Oil filter 2992544 Iveco/CNH, aftermarket

In stock

0,00 ₺

32/925953

Oil filter 32/925953 JCB JS, aftermarket

In stock

0,00 ₺

320/A4038

Oil filter 320/A4038 JCB JS, genuine

In stock

0,00 ₺

320/B4420

Oil filter 320/B4420 JCB Dieselmax, aftermarket, option 1

In stock

0,00 ₺

320/C4114

Oil filter 320/C4114 JCB, aftermarket

In stock

0,00 ₺

332/Z0319

Oil filter 332/Z0319 JCB, aftermarket

In stock

0,00 ₺

333/C1013

Oil filter 333/C1013 JCB, aftermarket

In stock

0,00 ₺

ST10804

Oil filter 3889310 Cummins, aftermarket

In stock

0,00 ₺

4324909

Oil filter 4324909 Perkins, aftermarket

In stock

0,00 ₺

ST10351

Oil filter 750201014627, aftermarket

In stock

0,00 ₺

2050067SX

Oil filter 94x142, aftermarket

In stock

0,00 ₺

8100137SX

Oil filter New Holland, aftermarket

In stock

0,00 ₺

RE504836

Oil filter RE504836 John Deere, aftermarket

In stock

0,00 ₺

Showing 433 to 456 of 465 (20 Pages)

Filters for construction machinery (page 19)