Machinery filters: oil, fuel, air, hydraulic

Categories

07/10/2026 27

JCB JS200–JS260 Monitor Messages: What They Mean and What to Check

On JCB JS200, JS210, JS220, JS240 and JS260 tracked excavators with the AMS control system, the monitor in the cab shows the working mode, the time, gauges for oil temperature, coolant temperature and fuel level, and warnings in the message line. Each message first of all points to a real problem: low fuel or coolant, a blocked filter, overheating. But if a message stays on after the cause has been put right, the sensor, wiring or controller is at fault. Below is what each message means and what to check, based on Section C of JCB service manual 9803/6400.

07/10/2026 34

JCB JS200–JS260 Track Tension: How to Check the Sag and Adjust the Tracks

Track tension on the JCB JS200, JS210, JS220, JS240 and JS260 tracked excavators should be checked every shift. With the track raised off the ground, the gap between the underside of the track frame and the top of the track shoe at the fourth bottom roller from the front should be 275–295 mm on hard ground and 320–340 mm on soft sand and sticky clay. Tension is adjusted with grease through the valve on the track adjuster cylinder. The procedure below follows Section 3 of JCB service manual 9803/6400.

07/10/2026 22

JCB 3CX and 4CX Dipper Ram Creep: Causes, Ram Creep Tests and Repair

If the dipper of a JCB 3CX or 4CX backhoe loader drops on its own under load, there are three possible causes: a leaking piston seal in the ram, spool leakage in the excavator valve section, or a leaking auxiliary relief valve (ARV) in that section. The JCB service manual gives a test procedure that identifies the culprit before the ram is removed and stripped. Below are the test sequence, the permitted creep and the repair rules from Section E of service manual 9803/3290.

07/10/2026 29

JCB 3CX and 4CX Hydraulic Oil: HP32 or HP46, System Capacity and Changing the Oil

For the hydraulic system of JCB 3CX and 4CX backhoe loaders, the JCB service manual recommends ISO VG32 oil — JCB Hydraulic Fluid HP32 — at air temperatures below +38 °C. The more viscous ISO VG46, JCB High Performance Hydraulic Oil, is for air temperatures above +38 °C only. Machines with Advanced EasyControl joysticks need a separate all-season HV class oil, JCB Multigrade Anti Shear. The hydraulic system holds approximately 130 litres. The oil is changed every 2000 hours and the filter at every 500-hour service.

07/10/2026 33

JCB 3CX and 4CX Antifreeze: Which Coolant to Use, How Much and How to Change It

On JCB 3CX and 4CX backhoe loaders with the JCB Dieselmax engine, the coolant is renewed every two years, at the 2000-hour service. The cooling system holds 18.5 litres. The JCB service manual calls for an ethylene glycol antifreeze to ASTM D6210 with corrosion inhibitors and rules out organic acid technology (OAT) products. The standard mix is 50%, which gives protection down to −40 °C. Below we cover choosing, checking and changing the antifreeze as described in Section 3 of JCB service manual 9803/3290.

Default Name Model

32/925630

Fuel sediment bowl assembly with filter 32/925630, aftermarket

In stock

0,00 ₺

333/Y6130

Fuel sedimenter assembly 333/Y6130 JCB 3CX/4CX, genuine

In stock

0,00 ₺

11210241

Fuel tank breather element 11210241 Volvo, aftermarket

In stock

0,00 ₺

32/925968

Fuel water separator filter 32/925968 JCB 3CX/4CX, genuine

In stock

0,00 ₺

32/925346

Hydraulic filter (upper) 32/925346 JCB 3CX/4CX, aftermarket, option 2

In stock

0,00 ₺

P556005

Hydraulic filter 1-1/8-16 UN, aftermarket

In stock

0,00 ₺

20639610

Hydraulic filter 20639610 Valtra, aftermarket

In stock

0,00 ₺

333/C4690

Hydraulic filter 32/902302 JCB, genuine

In stock

0,00 ₺

332/D5584A

Hydraulic filter 332/D5584A JCB Loadall, aftermarket, option 1

In stock

0,00 ₺

SH59029

Hydraulic filter 332/J9359 JCB, aftermarket

In stock

0,00 ₺

333/K0099

Hydraulic filter 333/K0099 JCB JS, aftermarket

In stock

0,00 ₺

333/W2655

Hydraulic filter 333/W2655 JCB Robot, genuine

In stock

0,00 ₺

334/C0376

Hydraulic filter 334/C0376 JCB, genuine

In stock

0,00 ₺

6900/0051

Hydraulic filter 6900/0051 JCB JS, genuine

In stock

0,00 ₺

TC5501

Hydraulic filter 76x123, aftermarket

In stock

0,00 ₺

HF35299

Hydraulic filter 9842392 NH/JD, aftermarket

In stock

0,00 ₺

581/18075

Hydraulic filter bowl 32/926051 JCB 3CX/4CX, genuine

In stock

0,00 ₺

WG985

Hydraulic filter V3.0924-08 Argo-Hytos, aftermarket

In stock

0,00 ₺

SH52521

Hydraulic filter, aftermarket

In stock

0,00 ₺

32/925164

Hydraulic fine filter (Plexus) 32/925164 JCB, aftermarket, option 2

In stock

0,00 ₺

LEFONG FY-5050

Hydraulic pilot filter 4294135 Hitachi, aftermarket

In stock

0,00 ₺

11211189

Hydraulic return filter 11211189 SDLG, aftermarket

In stock

0,00 ₺

207-60-71182

Hydraulic return filter 207-60-71182 Komatsu, aftermarket

In stock

0,00 ₺

31RF-10150

Hydraulic return filter 31Q6-01280 Hyundai, aftermarket

In stock

0,00 ₺

Showing 409 to 432 of 465 (20 Pages)

Filters for construction machinery (page 18)