Machinery filters: oil, fuel, air, hydraulic

Categories

07/10/2026 27

JCB JS200–JS260 Monitor Messages: What They Mean and What to Check

On JCB JS200, JS210, JS220, JS240 and JS260 tracked excavators with the AMS control system, the monitor in the cab shows the working mode, the time, gauges for oil temperature, coolant temperature and fuel level, and warnings in the message line. Each message first of all points to a real problem: low fuel or coolant, a blocked filter, overheating. But if a message stays on after the cause has been put right, the sensor, wiring or controller is at fault. Below is what each message means and what to check, based on Section C of JCB service manual 9803/6400.

07/10/2026 34

JCB JS200–JS260 Track Tension: How to Check the Sag and Adjust the Tracks

Track tension on the JCB JS200, JS210, JS220, JS240 and JS260 tracked excavators should be checked every shift. With the track raised off the ground, the gap between the underside of the track frame and the top of the track shoe at the fourth bottom roller from the front should be 275–295 mm on hard ground and 320–340 mm on soft sand and sticky clay. Tension is adjusted with grease through the valve on the track adjuster cylinder. The procedure below follows Section 3 of JCB service manual 9803/6400.

07/10/2026 23

JCB 3CX and 4CX Dipper Ram Creep: Causes, Ram Creep Tests and Repair

If the dipper of a JCB 3CX or 4CX backhoe loader drops on its own under load, there are three possible causes: a leaking piston seal in the ram, spool leakage in the excavator valve section, or a leaking auxiliary relief valve (ARV) in that section. The JCB service manual gives a test procedure that identifies the culprit before the ram is removed and stripped. Below are the test sequence, the permitted creep and the repair rules from Section E of service manual 9803/3290.

07/10/2026 29

JCB 3CX and 4CX Hydraulic Oil: HP32 or HP46, System Capacity and Changing the Oil

For the hydraulic system of JCB 3CX and 4CX backhoe loaders, the JCB service manual recommends ISO VG32 oil — JCB Hydraulic Fluid HP32 — at air temperatures below +38 °C. The more viscous ISO VG46, JCB High Performance Hydraulic Oil, is for air temperatures above +38 °C only. Machines with Advanced EasyControl joysticks need a separate all-season HV class oil, JCB Multigrade Anti Shear. The hydraulic system holds approximately 130 litres. The oil is changed every 2000 hours and the filter at every 500-hour service.

07/10/2026 33

JCB 3CX and 4CX Antifreeze: Which Coolant to Use, How Much and How to Change It

On JCB 3CX and 4CX backhoe loaders with the JCB Dieselmax engine, the coolant is renewed every two years, at the 2000-hour service. The cooling system holds 18.5 litres. The JCB service manual calls for an ethylene glycol antifreeze to ASTM D6210 with corrosion inhibitors and rules out organic acid technology (OAT) products. The standard mix is 50%, which gives protection down to −40 °C. Below we cover choosing, checking and changing the antifreeze as described in Section 3 of JCB service manual 9803/3290.

Default Name Model

4178134

Cab filter 417-8134 CAT, aftermarket

In stock

0,00 ₺

B222100000711K

Cab filter B222100000711K SANY, aftermarket

In stock

0,00 ₺

332/F9621

Cab fresh air filter 332/F9621 JCB, aftermarket

In stock

0,00 ₺

400/E7179

Cab fresh air filter 400/E7179 JCB Loadall, genuine

In stock

0,00 ₺

580/12185

Cab fresh air filter 580/12185 JCB, aftermarket

In stock

0,00 ₺

332/X6963

Cab heater filter 332/X6963 JCB Robot, aftermarket

In stock

0,00 ₺

332/X6963

Cab heater filter 332/X6963 JCB Robot, genuine

In stock

0,00 ₺

30/925959

Cab recirculation filter 30/925959 JCB Loadall, aftermarket

In stock

0,00 ₺

26550001

Coolant filter 26550001 Perkins, aftermarket

In stock

0,00 ₺

32/910601A

Filter element 32/910601A JCB, aftermarket

In stock

0,00 ₺

320/07482

New

Fuel filter (2 micron) 320/07482 JCB JS, aftermarket

In stock

0,00 ₺

10000-59650

Fuel filter 10000-59650 Perkins, aftermarket

In stock

0,00 ₺

ST20904

Fuel filter 10000-59652 Perkins, aftermarket

In stock

0,00 ₺

ST20903

Fuel filter 10000-59653 Perkins, aftermarket

In stock

0,00 ₺

ST20474

Fuel filter 11110474 Volvo, aftermarket

In stock

0,00 ₺

15221-43170

Fuel filter 15221-43170 Kubota, aftermarket

In stock

0,00 ₺

KC 6

Fuel filter 1902134 Iveco/Deutz, aftermarket

In stock

0,00 ₺

1R-0755

Fuel filter 1R-0755 CAT, aftermarket

In stock

0,00 ₺

SN40691

Fuel filter 311-3901 CAT/Manitou, aftermarket

In stock

0,00 ₺

32/925327

Fuel filter 32/925327 Perkins, aftermarket

In stock

0,00 ₺

32/925666

Fuel filter 32/925666 JCB 8014-8080, aftermarket, option 3

In stock

0,00 ₺

320/A7199

Fuel filter 320/A7199 JCB Loadall, genuine

In stock

0,00 ₺

320/A7360

Fuel filter 320/A7360 JCB Loadall, genuine

In stock

0,00 ₺

332/G0652

Fuel filter 332/G0652 JCB JS, genuine

In stock

0,00 ₺

Showing 337 to 360 of 465 (20 Pages)

Filters for construction machinery (page 15)