Rear lamp connector 721/11244 JCB, aftermarket

721/11244

Brand
JF Parts
Article
721/11244
Machine system
Electrics
Part type
Electrical connector
Machine brand
JCB
Manufacturing type
Aftermarket
All the features

In stock

0,00 ₺

We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.

Check the exact specifications and compatibility with your machine with our managers.

We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.

Free delivery to the carrier of your choice, or collect your order in Istanbul.

Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Message on WhatsApp Message on Telegram Call us: +90 531 224 49 66

For the JCB machines: rear lamp connector 721/11244, an aftermarket part.

This part is a sealed connector with a wire tail for the rear lamp connection of JCB machines, listed in the product card as 721/11244. It plugs into its mate in the lamp harness. The seals of a sealed connector keep water and dust away from the contacts, and a broken, melted or corroded connector makes the connected part fail now and then. Replacing just the connector with its wire tail avoids replacing the whole harness. The connector comes with its leads.

Specifications

Part number	721/11244
Production type	Aftermarket
Part type	Electrical connector
System / group	Electrics
Machine make	JCB

Compatibility

Other parts are in Wiring.

Fitting

Cut off the old connector and join the wires to those of the new one by colour; solder the joints and insulate them with heat-shrink. Push the connector into its mate until it locks and check that the connected lamp or part works.

Specifications

Machine system
Electrics
Part type
Electrical connector
Machine brand
JCB
Manufacturing type
Aftermarket

Questions: 0

No questions about this product.

07/10/2026 70

JCB 3CX and 4CX wiring diagrams before and after May 2009: sheets and component keys

Section C of the JCB service manual (publication 9803/3290-15) gives the JCB 3CX and 4CX backhoe loader wiring diagram in two versions: one for machines built up to May 2009 with analogue instruments and one for machines from May 2009 with the digital instrument panel. On the earlier machines the main machine circuit takes two sheets, with separate circuits for the gearboxes and options; the later circuit runs to 15 sheets. Below are the main sheets, the component keys and a guide to reading wire numbers.

07/10/2026 37

JCB 3CX / 4CX Electrics: Fuses, Relays, Battery, Alternator and Starter Motor Tests

Section C of the JCB service manual (publication 9803/3290-15) covers the electrical system of JCB 3C, 3CX and 4CX backhoe loaders: fuses and relays, circuit diagrams for machines of different build years, battery, alternator and starter motor testing, the wire numbering system, harness repair, earth points and harness drawings. The PDF has 402 pages, most of them harness drawings.