CETOP 3 solenoid directional valve 25/MM6396 JCB, OEM

25/MM6396

Article
25/MM6396
Machine system
Hydraulic system
Part type
Solenoid directional valve
Machine brand
JCB
Manufacturing type
OEM
All the features

In stock

0.00 ₺

We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.

Check the exact specifications and compatibility with your machine with our managers.

We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.

Free delivery to the carrier of your choice, or collect your order in Istanbul.

Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Message on WhatsApp Message on Telegram Call us: +90 531 224 49 66

CETOP 3 solenoid directional valve 25/MM6396 is an OEM part for the JCB machines.

CETOP valves used in transmission control direct oil to the direction or gear clutches of the Powershift gearbox, and a valve fault gives no drive in one direction or gear or a delayed shift. Before replacing the valve, measure the coil resistances and check the connectors and wiring. Do not remove the valve with hot oil. After the change, check the transmission oil level and try every direction and gear.

Specifications

Part number	25/MM6396
Production type	OEM
Part type	Solenoid directional valve
System / group	Hydraulic system
Machine make	JCB

Compatibility

According to sources, 25/MM6396 is the CETOP solenoid valve assembly used in the transmission control of JCB 3CX, 3DX and 4CX backhoe loaders, and it supersedes 25/220998. The catalogue also has the aftermarket version of this part. Other parts are in Solenoids and valves.

Fitting

Before the change, stop the engine, relieve the hydraulic pressure by moving the control levers a few times and switch off the ignition. Unplug the coil and remove the valve or cartridge. Lubricate the O-rings of the new part with clean hydraulic oil, fit it into its cavity without tilting and tighten to the specified torque. After connecting the plug, start the engine, test the function and check for leaks.

Specifications

Machine system
Hydraulic system
Part type
Solenoid directional valve
Machine brand
JCB
Manufacturing type
OEM

Questions: 0

No questions about this product.

07/10/2026 68

JCB 3CX and 4CX wiring diagrams before and after May 2009: sheets and component keys

Section C of the JCB service manual (publication 9803/3290-15) gives the JCB 3CX and 4CX backhoe loader wiring diagram in two versions: one for machines built up to May 2009 with analogue instruments and one for machines from May 2009 with the digital instrument panel. On the earlier machines the main machine circuit takes two sheets, with separate circuits for the gearboxes and options; the later circuit runs to 15 sheets. Below are the main sheets, the component keys and a guide to reading wire numbers.

07/10/2026 37

JCB 3CX / 4CX Electrics: Fuses, Relays, Battery, Alternator and Starter Motor Tests

Section C of the JCB service manual (publication 9803/3290-15) covers the electrical system of JCB 3C, 3CX and 4CX backhoe loaders: fuses and relays, circuit diagrams for machines of different build years, battery, alternator and starter motor testing, the wire numbering system, harness repair, earth points and harness drawings. The PDF has 402 pages, most of them harness drawings.