Loader bucket position sensor 701/80345, aftermarket

701/80345

Brand
JF Parts
Article
701/80345
Machine system
Sensors
Part type
Proximity switch
Machine brand
JCB
Manufacturing type
Aftermarket
Compatibility
JCB 3CX, 4CX
All the features

In stock

0.00 ₺

We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.

Check the exact specifications and compatibility with your machine with our managers.

We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.

Free delivery to the carrier of your choice, or collect your order in Istanbul.

Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Message on WhatsApp Message on Telegram Call us: +90 531 224 49 66

Loader bucket position sensor 701/80345 is an aftermarket part for the JCB 3CX and 4CX backhoe loaders. The card also lists 701/80243.

According to sources, this proximity switch belongs to the loader bucket levelling (return-to-dig) system of JCB 3CX and 4CX backhoe loaders. When the bucket linkage reaches the set position, the sensor detects a metal target and releases the control lever detent, so the bucket stops automatically in the digging position and the operator does not have to set it by hand before every load. A faulty sensor fails to stop the bucket in the right position. The numbers 701/80345 and 701/80243 relate to the same sensor. The bucket level can be fine-tuned by moving the sensor bracket. The sensor comes with its cable and connector.

Specifications

Part number	701/80345
Cross / alternative numbers	701/80243
Production type	Aftermarket
Part type	Proximity switch
System / group	Sensors
Machine make	JCB

Compatibility

Other parts are in Sensors.

Fitting

The sensor screws into its bracket by its threaded body and is locked by two lock nuts, the gap to the target being set by turning the nuts. Too large a gap and the sensor misses the target; too small and the target can strike the tip. Secure the cable with ties away from moving parts and test the function.

Specifications

Machine system
Sensors
Part type
Proximity switch
Machine brand
JCB
Manufacturing type
Aftermarket
Compatibility
JCB 3CX, 4CX

Questions: 0

No questions about this product.

07/10/2026 68

JCB 3CX and 4CX wiring diagrams before and after May 2009: sheets and component keys

Section C of the JCB service manual (publication 9803/3290-15) gives the JCB 3CX and 4CX backhoe loader wiring diagram in two versions: one for machines built up to May 2009 with analogue instruments and one for machines from May 2009 with the digital instrument panel. On the earlier machines the main machine circuit takes two sheets, with separate circuits for the gearboxes and options; the later circuit runs to 15 sheets. Below are the main sheets, the component keys and a guide to reading wire numbers.

07/10/2026 37

JCB 3CX / 4CX Electrics: Fuses, Relays, Battery, Alternator and Starter Motor Tests

Section C of the JCB service manual (publication 9803/3290-15) covers the electrical system of JCB 3C, 3CX and 4CX backhoe loaders: fuses and relays, circuit diagrams for machines of different build years, battery, alternator and starter motor testing, the wire numbering system, harness repair, earth points and harness drawings. The PDF has 402 pages, most of them harness drawings.