Track rod 453/26700 JCB, aftermarket, option 1

For the JCB machines: track rod 453/26700, an aftermarket part.

The track rod is checked on level ground with the engine running by turning the steering slightly each way: visible play or a knocking sound at the ball joint shows wear. If the ball joint boots are torn, dust and water get in and ruin the joint quickly. The grease nipples on the rod ends, where fitted, are greased at the service interval.

Specifications

Compatibility

The product cards give it as a telehandler track rod; sources list 453/26700 as the right-hand steering link of JCB JS wheeled excavators. Fit is confirmed by the machine serial number. The catalogue also has the aftermarket version of this part. Other parts are in Front axle.

Fitting

Before removing the old rod, mark the position of the adjusting nuts. Separate the ball joint tapers with a proper splitter, since hammering can damage the knuckle bore. When fitting the new rod the tapers must be clean and dry, the nuts tightened to the specified torque and new split pins fitted. After fitting, turn the steering to full lock both ways and check that the rod fouls nothing. The track rod comes new, and its ball joint boots and nuts are checked before fitting.