- BrandJCB
- Article04/501800
- Machine systemTransmission
- Part typeTorque converter
- Machine brandJCB
- Manufacturing typeOriginal
- All the features
For the JCB machines: torque converter 04/501800, a genuine JCB part.
The converter is chosen by part number for the gearbox type and engine connection; converters of the same size can have different torque ratios and stall speeds, and the wrong one changes the machine's pulling power and fuel use. When the converter is replaced, the transmission oil, filter and oil cooler are flushed or renewed, because metal debris from the old unit collects in the cooler and can come back into the new one. The hub seal and transmission pump are checked too. The converter's condition can easily be judged with a stall test: holding the machine on the brakes in forward gear, apply full throttle and compare the engine speed with the service value.
Specifications
| Part number | 04/501800 |
| Manufacturer | JCB |
| Production type | Original |
| Part type | Torque converter |
| System / group | Transmission |
| Machine make | JCB |
Compatibility
According to the product card, 04/501800 is a torque converter. Fit is confirmed by the part number. Other parts are in Transmission.
Fitting
The converter comes out once the gearbox is separated from the engine. Before fitting the new one, pour some clean transmission oil into it and push the hub in while turning it until it engages fully with the pump drive; a converter not fully home can break the pump when the engine is bolted up. Tighten the drive plate bolts to the specified torque. After assembly, top up the oil, let the engine idle so the converter fills, then carry out the stall test and pressure checks.
Specifications
- Machine systemTransmission
- Part typeTorque converter
- Machine brandJCB
- Manufacturing typeOriginal
No questions about this product.
