Torsional vibration damper 565/51613 JCB, aftermarket

565/51613

Brand
JF Parts
Article
565/51613
Machine system
Transmission
Part type
Damper
Machine brand
JCB
Manufacturing type
Aftermarket
All the features

In stock

0.00 ₺

We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.

Check the exact specifications and compatibility with your machine with our managers.

We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.

Free delivery to the carrier of your choice, or collect your order in Istanbul.

Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Message on WhatsApp Message on Telegram Call us: +90 531 224 49 66

Torsional vibration damper 565/51613 is an aftermarket part for the JCB machines.

A damper is a spring or rubber flexible coupling between the engine flywheel and the input of the gearbox or hydrostatic pump. It absorbs the torsional vibration produced by each cylinder firing and keeps it from reaching the gears, shafts and pump. A damper with weakened springs or broken-up rubber causes rattling at idle and low revs, driveline vibration and gear chatter; in severe cases it breaks up and the drive is lost completely.

Specifications

Part number	565/51613
Production type	Aftermarket
Part type	Damper
System / group	Transmission
Machine make	JCB

Compatibility

According to the product card, 565/51613 is a damper. Fit is confirmed by the part number. Other parts are in Transmission.

Fitting

The damper is changed once the gearbox is separated from the engine. Clean the flywheel face, fit the new damper the right way round (usually with the hub boss towards the gearbox) and tighten the bolts in a cross pattern to the specified torque. Apply a thin film of the recommended grease to the input shaft splines. Do not let the gearbox hang on the damper hub while refitting; after assembly, run the engine and check for vibration and noise.

Specifications

Machine system
Transmission
Part type
Damper
Machine brand
JCB
Manufacturing type
Aftermarket

Questions: 0

No questions about this product.

JCB 3CX / 4CX 07/10/2026 28

JCB 3CX / 4CX Transmission: Gearboxes, Axles, Pressures and Stall Test

Section F of the JCB service manual covers the transmission of the JCB 3C, 3CX and 4CX backhoe loaders: Synchro Shuttle SS700, Powershift PS764 and PS766 gearboxes, torque converter, front and rear axles, propshafts and oil cooler. It contains technical data, gearbox operation and electrics, pressure tests, the torque converter stall test, fault finding tables and removal procedures. This is issue 9803/3290-16 of the manual; the PDF runs to 306 pages.

Useful articles 02/10/2026 55

Which gearbox and axles are fitted to your JCB 3CX/4CX

Gearbox and axle parts are matched to a specific unit. Here is which transmissions and axles are fitted to JCB 3CX and 4CX backhoe loaders and how to tell them apart. The data comes from the JCB service manual for 3C, 3CX and 4CX backhoe loaders (machines with serial numbers 960001–989999, 1327000–1349999 and 1616000–1625999).