- BrandJCB
- Article32/902200
- Machine systemTransmission
- Part typeTransmission suction strainer
- Machine brandJCB
- Manufacturing typeOriginal
- CompatibilityJCB 3CX, 4CX
- All the features
For the JCB 3CX and 4CX backhoe loaders: transmission suction strainer 32/902200, a genuine JCB part.
Metal particles or lining debris on the strainer point to wear inside the transmission, which then needs checking. The strainer is chosen by part number so its body length and mounting dimensions match the old one. Its gasket is renewed on fitting, since a leak on the suction side makes the pump draw in air and the oil foam. The strainer comes new. When changing the transmission oil, clean the drain plug magnet too: fine metal dust on it is normal, but large pieces point to a fault.
Specifications
| Part number | 32/902200 |
| Manufacturer | JCB |
| Production type | Original |
| Part type | Transmission suction strainer |
| System / group | Transmission |
| Machine make | JCB |
Compatibility
According to sources, 32/902200 (813/50027) is the transmission suction strainer of JCB 2CX, 3CX, 4CX and 5CX backhoe loaders and telehandlers such as the 504B, 531-70 and 550-140. The catalogue also has the aftermarket version of this part. Other parts are in Genuine JCB filters.
Fitting
Drain the transmission oil into a container before removing the strainer. Wash the strainer in clean fuel and dry it with gentle air from the inside out. After fitting, fill the transmission with the specified oil, start the engine and check the level by the maker's method.
Specifications
- Machine systemTransmission
- Part typeTransmission suction strainer
- Machine brandJCB
- Manufacturing typeOriginal
- CompatibilityJCB 3CX, 4CX
No questions about this product.
