- Article333/W2655
- Machine systemFiltration systems
- Part typeHydraulic filter
- Machine brandJCB
- Manufacturing typeAftermarket
- All the features
For the JCB Robot skid steers and compact track loaders: hydraulic filter 333/W2655, an aftermarket part.
The hydraulic filter traps wear particles and dirt in the hydraulic oil, extending the life of the pump, control valves and cylinders. Most hydraulic system failures are caused by dirty oil: particles wear valve spools, increase internal pump leakage and damage seals. The filter is changed at the maker's interval, shortened on machines working with a breaker or other heavy attachments. When the filter clogs, its bypass valve opens and oil starts circulating unfiltered. The filter comes new.
Specifications
| Part number | 333/W2655 |
| Production type | Aftermarket |
| Part type | Hydraulic filter |
| System / group | Filtration systems |
| Machine make | JCB |
Compatibility
According to sources, 333/W2655 is a hydraulic filter element related to 332/X2640 and 332/X2638, used on JCB 260T, 300T and 320T compact track loaders and 135-330 series skid steers. The catalogue also has the genuine version of this part. Other parts are in Genuine JCB filters.
Fitting
Before the change, park the machine on level ground, lower the attachments and release the hydraulic tank pressure by opening the cap slowly. Clean around the filter housing, since even the smallest dirt entering the hydraulic system harms the pump and valves. Remove the old element, lubricate the new one's seal with clean hydraulic oil and seat it. After the change, start the engine, work the functions a few times to purge air and check the oil level. Check the hydraulic oil level in the position the maker specifies (usually with the arms in a set position), since a reading taken in the wrong position leads to over- or under-filling.
Specifications
- Machine systemFiltration systems
- Part typeHydraulic filter
- Machine brandJCB
- Manufacturing typeAftermarket
No questions about this product.
