907/20049
  • Brand
    JF Parts
  • Article
    907/20049
  • Machine system
    Transmission
  • Part type
    Bearing
  • Machine brand
    JCB
  • Manufacturing type
    Aftermarket
  • All the features
In stock
0.00 ₺
We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.
Check the exact specifications and compatibility with your machine with our managers.
We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.
Free delivery to the carrier of your choice, or collect your order in Istanbul.
Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

For the JCB machines: transmission bearing 907/20049, an aftermarket part.

A bearing is chosen by inside and outside diameter and width, as well as by roller type, contact angle and clearance class. A bearing of the same size but a different clearance class can upset the gearbox setting, so it is chosen by part number. On taper bearings the cone and cup must match: a new cone is never run in an old cup. A bearing with flaking, discolouration or dents on its raceways is replaced even if it is not yet noisy.

Specifications


Part number907/20049
Production typeAftermarket
Part typeBearing
System / groupTransmission
Machine makeJCB

Compatibility

According to the product card, 907/20049 is a transmission bearing. The card also lists 907/09600, another JCB number for the same part. Standard bearing designation: 25877/25821. Fit is confirmed by the part number. The catalogue also has the genuine version and aftermarket version of this part. Other parts are in Transmission.

Fitting

When one bearing is changed, the opposite bearing on the same shaft is checked too and they are usually replaced as a pair. Inspect the bearing seats and shaft journals for wear or signs of spinning: if a ring has spun in its seat, do not fit a new bearing until the seat is repaired. After assembly, fill the gearbox with oil, check noise and heat on a short test drive and do the first oil change early.

Specifications

  • Machine system
    Transmission
  • Part type
    Bearing
  • Machine brand
    JCB
  • Manufacturing type
    Aftermarket
Questions: 0
Your question:

No questions about this product.

JCB 3CX / 4CX 07/10/2026 88
JCB 3CX / 4CX Transmission: Gearboxes, Axles, Pressures and Stall Test
Section F of the JCB service manual covers the transmission of the JCB 3C, 3CX and 4CX backhoe loaders: Synchro Shuttle SS700, Powershift PS764 and PS766 gearboxes, torque converter, front and rear axles, propshafts and oil cooler. It contains technical data, gearbox operation and electrics, pressure tests, the torque converter stall test, fault finding tables and removal procedures. This is issue 9803/3290-16 of the manual; the PDF runs to 306 pages.
Useful articles 02/10/2026 86
Which gearbox and axles are fitted to your JCB 3CX/4CX
Gearbox and axle parts are matched to a specific unit. Here is which transmissions and axles are fitted to JCB 3CX and 4CX backhoe loaders and how to tell them apart. The data comes from the JCB service manual for 3C, 3CX and 4CX backhoe loaders (machines with serial numbers 960001–989999, 1327000–1349999 and 1616000–1625999).
Similar products
907/51500
Transmission taper bearing 907/51500 JCB, aftermarket
04/501700
Converter drive plate 04/501700 JCB, aftermarket
Converter drive plate 04/501700 JCB, aftermarket
In stock
0.00 ₺
333/C5078
Transmission friction plate 333/C5078 JCB, genuine
445/10703
Front axle drive flange 445/10703 JCB, aftermarket
445/19802
Piston housing 445/19802 JCB, aftermarket
Piston housing 445/19802 JCB, aftermarket
In stock
0.00 ₺

This site uses essential cookies (session, cart, language, currency). If you click «Accept», Google Analytics and Yandex Metrica cookies are also used for visit statistics; if you click «Decline», they are not loaded. Personal data is processed under the Turkish data protection law KVKK No. 6698. Details: Privacy and cookie policy.