Front axle drive flange 445/10703 JCB, aftermarket

445/10703

Brand
INTER
Article
445/10703
Machine system
Transmission
Part type
Flange
Machine brand
JCB
Manufacturing type
Aftermarket
All the features

In stock

0.00 ₺

We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.

Check the exact specifications and compatibility with your machine with our managers.

We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.

Free delivery to the carrier of your choice, or collect your order in Istanbul.

Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Message on WhatsApp Message on Telegram Call us: +90 531 224 49 66

Front axle drive flange 445/10703 is an aftermarket part for the JCB machines. According to the product card, this flange is used in the front axle drive.

Wear on the flange seal surface is usually caused by an unbalanced propshaft, worn universal joints or a missing dust shield in front of the seal in dusty work. If the cause is not dealt with, a new flange will also wear early. Check the propshaft bolts and joints along with the flange change. A thin film of oil on the splines also makes the next removal of the flange easier.

Specifications

Part number	445/10703
Production type	Aftermarket
Part type	Flange
System / group	Transmission
Machine make	JCB

Compatibility

According to the product card, 445/10703 is a flange. Fit is confirmed by the part number. The catalogue also has the OEM version of this part. Other parts are in Transmission.

Fitting

Remove the flange with a puller after disconnecting the propshaft and undoing the nut. After renewing the seal, fit the new flange with the splines and seal surface lightly oiled, tighten the nut to the manual torque or bearing preload and lock it. Tighten the propshaft bolts to the specified torque and check for leaks after the first run. Marking the flange position on the shaft before undoing the nut makes reassembly easier on propshafts that need balance. The nut is usually a locking type and is not reused.

Specifications

Machine system
Transmission
Part type
Flange
Machine brand
JCB
Manufacturing type
Aftermarket

Questions: 0

No questions about this product.

JCB 3CX / 4CX 07/10/2026 30

JCB 3CX / 4CX Transmission: Gearboxes, Axles, Pressures and Stall Test

Section F of the JCB service manual covers the transmission of the JCB 3C, 3CX and 4CX backhoe loaders: Synchro Shuttle SS700, Powershift PS764 and PS766 gearboxes, torque converter, front and rear axles, propshafts and oil cooler. It contains technical data, gearbox operation and electrics, pressure tests, the torque converter stall test, fault finding tables and removal procedures. This is issue 9803/3290-16 of the manual; the PDF runs to 306 pages.

Useful articles 02/10/2026 56

Which gearbox and axles are fitted to your JCB 3CX/4CX

Gearbox and axle parts are matched to a specific unit. Here is which transmissions and axles are fitted to JCB 3CX and 4CX backhoe loaders and how to tell them apart. The data comes from the JCB service manual for 3C, 3CX and 4CX backhoe loaders (machines with serial numbers 960001–989999, 1327000–1349999 and 1616000–1625999).