- BrandJF Parts
- Article801/05070
- Machine systemHydraulic system
- Part typePin
- Machine brandHIDROMEK
- Manufacturing typeAftermarket
- Machine seriesHMK 102B, HMK 102S, HMK 105, HMK 62
- Outer diameter, mm40
- Length, mm168
- All the features
For the Hidromek backhoe loaders: joint pin 801/05070, an aftermarket part.
Pins are made of steel with a hardened, ground surface, which gives wear resistance under heavy shock loads. When a pin is replaced, the ovality of the eyes is measured too: if the eyes are worn, replacing only the pin and bush will not remove the play and the eyes need repairing.
Specifications
| Part number | 801/05070 |
| Production type | Aftermarket |
| Part type | Pin |
| System / group | Hydraulic system |
| Machine make | HIDROMEK |
| Series / model | HMK 102B, HMK 102S, HMK 105, HMK 62 |
| Outer diameter | 40 mm |
| Length | 168 mm |
Compatibility
According to the product card, 801/05070 is a pin. Machines listed on the card: HMK 102B, HMK 102S, HMK 105, HMK 62. Fit is confirmed by the part number. Other parts are in Hidromek pins.
Fitting
Before the change, lower the attachment to the ground or support it securely, stop the engine and release the hydraulic pressure. Remove the locking element and drift the pin out with a suitable punch without damaging the eyes. After cleaning and checking the eye and bush, fit the new pin greased, refit the locking element and grease the joint until clean grease comes out.
Specifications
- Machine systemHydraulic system
- Part typePin
- Machine brandHIDROMEK
- Manufacturing typeAftermarket
- Machine seriesHMK 102B, HMK 102S, HMK 105, HMK 62
- Outer diameter, mm40
- Length, mm168
No questions about this product.
