- BrandJF Parts
- Article801/04096
- Machine systemHydraulic system
- Part typePin
- Machine brandHIDROMEK
- Manufacturing typeAftermarket
- Machine seriesHMK 102B, HMK 102S, HMK 105, HMK 62
- All the features
For the Hidromek backhoe loaders: joint pin 801/04096, an aftermarket part.
The pin is chosen by part number according to its diameter, length, head shape and locking method (bolt and plate, circlip or lock pin). On one machine the bucket, dipper, boom and cylinder pins differ in size and are not interchangeable. When a new pin is fitted, the bushes and seals are checked too, as a new pin in a worn bush soon develops play.
Specifications
| Part number | 801/04096 |
| Production type | Aftermarket |
| Part type | Pin |
| System / group | Hydraulic system |
| Machine make | HIDROMEK |
| Series / model | HMK 102B, HMK 102S, HMK 105, HMK 62 |
Compatibility
According to the product card, 801/04096 is a pin. Machines listed on the card: HMK 102B, HMK 102S, HMK 105, HMK 62. Fit is confirmed by the part number. Other parts are in Hidromek pins.
Fitting
Before the change, lower the attachment to the ground or support it securely, stop the engine and release the hydraulic pressure. Remove the locking element and drift the pin out with a suitable punch without damaging the eyes. After cleaning and checking the eye and bush, fit the new pin greased, refit the locking element and grease the joint until clean grease comes out.
Specifications
- Machine systemHydraulic system
- Part typePin
- Machine brandHIDROMEK
- Manufacturing typeAftermarket
- Machine seriesHMK 102B, HMK 102S, HMK 105, HMK 62
No questions about this product.
