- BrandJF Parts
- Article801/04130
- Machine systemHydraulic system
- Part typePin
- Machine brandHIDROMEK
- Manufacturing typeAftermarket
- Machine seriesHMK 102B, HMK 102S, HMK 105, HMK 62
- All the features
Joint pin 801/04130 is an aftermarket part for the Hidromek backhoe loaders.
Pin life depends largely on greasing: bucket and dipper pins are greased daily and other joints at the maker's intervals. Pump in grease until it pushes out the old grease and dirt. A pin with a blocked grease channel runs dry and can wear out in a few days, so the grease nipples are checked regularly too.
Specifications
| Part number | 801/04130 |
| Production type | Aftermarket |
| Part type | Pin |
| System / group | Hydraulic system |
| Machine make | HIDROMEK |
| Series / model | HMK 102B, HMK 102S, HMK 105, HMK 62 |
Compatibility
According to the product card, 801/04130 is a pin. Machines listed on the card: HMK 102B, HMK 102S, HMK 105, HMK 62. Fit is confirmed by the part number. Other parts are in Hidromek pins.
Fitting
Before the change, lower the attachment to the ground or support it securely, stop the engine and release the hydraulic pressure. Remove the locking element and drift the pin out with a suitable punch without damaging the eyes. After cleaning and checking the eye and bush, fit the new pin greased, refit the locking element and grease the joint until clean grease comes out.
Specifications
- Machine systemHydraulic system
- Part typePin
- Machine brandHIDROMEK
- Manufacturing typeAftermarket
- Machine seriesHMK 102B, HMK 102S, HMK 105, HMK 62
No questions about this product.
