Load holding valve 25/207300 JCB, genuine

25/207300

Brand
JCB
Article
25/207300
Machine system
Hydraulic system
Part type
Load holding valve
Machine brand
JCB
Manufacturing type
Original
All the features

In stock

0.00 ₺

We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.

Check the exact specifications and compatibility with your machine with our managers.

We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.

Free delivery to the carrier of your choice, or collect your order in Istanbul.

Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Message on WhatsApp Message on Telegram Call us: +90 531 224 49 66

Load holding valve 25/207300 is a genuine JCB part for the JCB machines. The card also lists E6B060Z, 8868506, 310N409.

The load holding (counterbalance) valve fits on the load-bearing side of a cylinder: with the control in neutral it blocks the oil and holds the load, and when operated it opens under pilot pressure for a slow, smooth descent. If a hose bursts, it stops the boom or load dropping uncontrolled, making it an important safety element. A faulty valve lets the load creep down, causes jerky movements or stops the arm being lowered. The cartridge is supplied new with a factory setting. Load holding valves are fundamental to the safety of lifting machines, so they are replaced only with the same part number. The setting is chosen above the cylinder pressure at full load. The valve sits in the block on the cylinder and protects against a hose burst. The valve is made of steel.

Specifications

Part number	25/207300
Cross / alternative numbers	E6B060Z, 8868506, 310N409
Manufacturer	JCB
Production type	Original
Part type	Load holding valve
System / group	Hydraulic system
Machine make	JCB

Compatibility

The valve is used on JCB telehandlers and backhoe loaders. The catalogue also has the aftermarket version of this part. Other parts are in Hydraulic valves.

Fitting

Do not alter the valve setting; replace it only with a valve of the same part number. Check the sealing after fitting.

Specifications

Machine system
Hydraulic system
Part type
Load holding valve
Machine brand
JCB
Manufacturing type
Original

Questions: 0

No questions about this product.

JCB 3CX / 4CX 07/10/2026 49

JCB 3CX and 4CX hydraulic circuit diagrams by build year, with component keys

There is no single hydraulic circuit for the JCB 3CX and 4CX backhoe loader: it depends on the build year and the pump type. Section E of the JCB service manual (publication 9803/3290-14) gives separate circuits for the gear pump 3CX built before and after September 2007, for the variable flow 4CX (7-spool and 6-spool), and for the 3C-14 (214e) and 3C machines. Below you will find the circuits themselves, the component keys and some notes on tracing the oil flow through a circuit.

Useful articles 07/10/2026 40

JCB 3CX / 4CX Hydraulic Pressure: Settings, Pressure Testing and Causes of Low Pressure

On JCB 3CX and 4CX backhoe loaders with a gear pump, the working pressure of the hydraulic system is limited by the main relief valve in the loader valve: 236–241 bar on machines up to serial number 964124 and 248–252 bar on machines from serial number 964125 (standard and high-pressure hydraulics). It is checked with a 0–400 bar pressure gauge connected to the loader valve test point, with the engine at 1500 rev/min and the oil warmed to 50 °C. Below are the settings, the test procedure and the reasons why pressure drops, taken from the JCB service manual (Section E).

JCB 3CX / 4CX 07/10/2026 18

JCB 3CX / 4CX Hydraulics: Circuit Diagrams, Pumps and Relief Valve Pressures

Section E of the JCB service manual (publication 9803/3290-14) deals with the hydraulic system of the JCB 3C, 3CX and 4CX backhoe loaders. It brings together technical data for the pumps and valve blocks, hydraulic circuits for machines of different build years, valve operation, fault finding tables, and the procedures for pressure testing and for overhauling the pump, valves and rams. The section PDF runs to 302 pages.