- BrandJF Parts
- ArticleHFH-19F-G1
- Machine systemHydraulic system
- Part typeQuick coupling
- Manufacturing typeAftermarket
- Additional infosize 19, G1 thread
- All the features
Flat-face quick coupling 1" female, G1 thread is an aftermarket part for the construction machines. The aftermarket product code is HFH-19F-G1.
A quick release coupling lets attachment hoses be connected and disconnected without tools and without losing oil; it consists of a female and a male half. Flat-face couplings lose almost no oil when separated and let no air or dirt into the system when connected. A worn or damaged coupling leaks, is hard to connect or restricts flow in the attachment line. Coupling size and thread are chosen to suit the hose line. The genuine coupling is the standard coupling for JCB attachment lines, with a corrosion-protected body. Its internal valve closes both halves when separated, so the oil stays in both the attachment and the machine when the hoses are disconnected. The coupling is supplied new. The coupling body carries its size and series marks. State the size and the mating half type when ordering. Clean the coupling faces before connecting. Use it with a dust cap.
Specifications
| Production type | Aftermarket |
| Part type | Quick coupling |
| System / group | Hydraulic system |
Compatibility
HFH-19F-G1 is the female (socket) half of a flat-face quick release coupling. In the code, F stands for the female half, 19 for the body size and the last part for the G1 female thread on the shank; G marks a parallel pipe thread (BSPP), so the hose fitting or adaptor must have the same thread. In flat-face couplings the valve is flush with the face: almost no oil is lost on disconnection and no air or dirt gets in on connection. The photos show a steel body with a spanner hexagon at the threaded end, a flat front face and a locking sleeve with two knurled bands, with the locking ball visible in its slot. The valve disc sits in the centre of the face inside an annular sleeve; the code is engraved on the body. Body and locking part are the same size 19 as the HFH-19F-G34 version; the difference is the connection thread: G1 here, larger than G3/4. No working pressure or flow data could be found for this code, so none are given here. Mating male half: 1" male quick coupling 45/910200; dust cap: 1" female quick coupling dust cap. Other parts are in High-pressure hoses.
Fitting
Fit the coupling to the hose or pipe with a seal suited to the thread and tighten it on its spanner flats without striking the body. Clean the faces before connecting and check the coupling locks fully.
Specifications
- Machine systemHydraulic system
- Part typeQuick coupling
- Manufacturing typeAftermarket
- Additional infosize 19, G1 thread
No questions about this product.
