- Article45/910200
- Machine systemHydraulic system
- Part typeQuick coupling
- Machine brandJCB
- Manufacturing typeAftermarket
- All the features
For the JCB machines: flat-face quick coupling 1", male 45/910200, an aftermarket part. The card also lists 45/904600, A45/910200.
Both halves must be of the same standard and size, since halves of different standards will not connect or lock fully. Unused couplings should be closed with dust caps, as sand and dirt on the face quickly wear the seals. Relieving line pressure before connecting makes the coupling easy and safe to join. The aftermarket coupling matches the original in size, thread standard and flat-face design and can be used with a genuine mating half. If it does not lock fully when connected, the attachment will not work or pressure builds in the line; relieve the line pressure and connect again. Its seals resist hydraulic oil and heat. The coupling is supplied new and is best used with a dust cap.
Specifications
| Part number | 45/910200 |
| Cross / alternative numbers | 45/904600, A45/910200 |
| Production type | Aftermarket |
| Part type | Quick coupling |
| System / group | Hydraulic system |
| Machine make | JCB |
Compatibility
The JCB catalogue calls the part Coupling 1"BSP male quick release: the male half of a flat-face quick release coupling with a 1" BSP connection. The number appears on about three hundred models and assemblies. Most are breaker lines on backhoe loaders: HM380, HM385 and HM386Q installations on the 3CX and 4CX (Centremount and Sideshift, 2WS and AWS), the 214, 215, 217, 3C, 3CX Super and 4CXM. On the HM380 breaker general view it is item 17, on the hose that feeds oil to the breaker. It is also in the auxiliary circuit coupling group of the JS115, JS130LC, JS145, JS160, JS180, JS190 and JZ140 tracked excavators, the JS130W–JS175W wheeled excavators, the high-flow line of the Robot 165HF–1110HF skid steers and the 416S loader. Each assembly has one. The photo shows a steel nose, a cylindrical body and a wide hexagon with a female thread. Mating female halves: HFH-19F-G34 (G3/4 thread) and HFH-19F-G1 (G1 thread). While the attachment is off, the nose is closed with the 1" male quick coupling dust cap. Other parts are in High-pressure hoses.
Fitting
After fitting, run the attachment and check the joint for leaks; keep the dust caps fitted.
Specifications
- Machine systemHydraulic system
- Part typeQuick coupling
- Machine brandJCB
- Manufacturing typeAftermarket
No questions about this product.
