- BrandJF Parts
- ArticleHFH-PDC-1/2F
- Machine systemHydraulic system
- Part typeQuick coupler dust cap
- Manufacturing typeAftermarket
- All the features
Quick coupling dust cap 3/4", female is an aftermarket part for the construction machines. The aftermarket product code is HFH-PDC-1/2F.
The dust cap covers the end of a hydraulic quick-release coupling when it is disconnected, protecting it from dust, water and knocks. On auxiliary hydraulic lines, an open coupling half soon gets dirty once a breaker or other attachment is removed, and at the next connection that dirt goes straight into the hydraulic system, damaging the coupling valve and seal and possibly the pump and valves.
Specifications
| Production type | Aftermarket |
| Part type | Quick coupler dust cap |
| System / group | Hydraulic system |
Compatibility
The cap fits the female (socket) half of a disconnected 3/4" flat-face quick coupling. It is a straight-walled cup; the front of the coupling enters its open end. The model code says 1/2 while the name gives 3/4"; go by the coupling below when choosing. The raised marks on the side panel cannot be read on the photo, so they are not given. It is red plastic, moulded in one piece with a thin cord and a ring; the ring goes over the hose or coupling body so the removed cap is not lost. It is sold separately from the coupling, one piece. Fits the HFH-12F-G34 coupling. The male cap of this series is the 3/4" male dust cap. Other parts are in High-pressure hoses.
Fitting
When an attachment is removed, wipe the coupling ends and cap them straight away; before connecting, take the cap off and clean the end again. Couplings must not be connected under pressure, so release the line pressure first. The inside of the cap gets dirty with dust and oil residue over time, so the cap itself is also washed and dried now and then.
Specifications
- Machine systemHydraulic system
- Part typeQuick coupler dust cap
- Manufacturing typeAftermarket
No questions about this product.
