- BrandJF Parts
- ArticleHFH-19F-G34
- Machine systemHydraulic system
- Part typeQuick coupling
- Manufacturing typeAftermarket
- Additional infosize 19, G3/4 thread
- All the features
For the construction machines: flat-face quick coupling 1" female, G3/4 thread, an aftermarket part. The aftermarket product code is HFH-19F-G34.
Both halves must be of the same standard and size, since halves of different standards will not connect or lock fully. Unused couplings should be closed with dust caps, as sand and dirt on the face quickly wear the seals. Relieving line pressure before connecting makes the coupling easy and safe to join. The aftermarket coupling matches the original in size, thread standard and flat-face design and can be used with a genuine mating half. If it does not lock fully when connected, the attachment will not work or pressure builds in the line; relieve the line pressure and connect again. Its seals resist hydraulic oil and heat. The coupling is supplied new and is best used with a dust cap.
Specifications
| Production type | Aftermarket |
| Part type | Quick coupling |
| System / group | Hydraulic system |
Compatibility
HFH-19F-G34 is the female (socket) half of a flat-face quick release coupling. In the code, F stands for the female half, 19 for the body size and the last part for the G3/4 female thread on the shank; G marks a parallel pipe thread (BSPP), so the hose fitting or adaptor must have the same thread. In flat-face couplings the valve is flush with the face: almost no oil is lost on disconnection and no air or dirt gets in on connection. The photos show a steel body with a spanner hexagon at the threaded end, a flat front face and a locking sleeve with two knurled bands, with the locking ball visible in its slot. The valve disc sits in the centre of the face inside an annular sleeve; the code is engraved on the body. Although the name says 1", the connection thread is smaller by the code, G3/4. It differs from the HFH-19F-G1 coupling only by the thread. No working pressure or flow data could be found for this code, so none are given here. The mating flat-face male half of the same size 19 is the 1" male quick coupling 45/910200. A disconnected coupling is closed with the 1" female quick coupling dust cap. Other parts are in High-pressure hoses.
Fitting
Fit the coupling to the hose or pipe with a seal suited to the thread and tighten it on its spanner flats without striking the body. Clean the faces before connecting and check the coupling locks fully.
Specifications
- Machine systemHydraulic system
- Part typeQuick coupling
- Manufacturing typeAftermarket
- Additional infosize 19, G3/4 thread
No questions about this product.
