- Article20/950663
- Machine systemHydraulic system
- Part typeServo (pilot) pump
- Machine brandJCB
- Manufacturing typeAftermarket
- Machine seriesJS130W, JS145W, JS160W, JS175W
- Additional infoPump gear; mounted on the main pump, item 17
- All the features
Gear pump 20/950663 is an aftermarket part for the JCB JS wheeled excavators.
A servo pump (pilot pump) is a small gear pump that supplies low-pressure oil to the excavator's pilot circuit; it is usually mounted at the rear of the main pump and turns with the main pump shaft. The pilot circuit moves the main control valve spools according to the joystick signals and also feeds the solenoid valves for travel speed, swing brake and power mode. According to sources, this pump is used on JCB JS115, JS130, JS145, JS160, JS180, JS190 and JS290 excavators. A worn servo pump lowers pilot pressure: movements become slow and weak, and some functions stop working altogether. Before replacing it, measure the pilot pressure and check the pilot filter. The cleanliness of the pilot circuit decides the life of the servo pump and pilot valves, so renew the pilot filter when the pump is changed. The pump is chosen by part number, and its spline connection and flange are compared with the old one.
Specifications
| Part number | 20/950663 |
| Production type | Aftermarket |
| Part type | Servo (pilot) pump |
| System / group | Hydraulic system |
| Machine make | JCB |
| Series / model | JS130W, JS145W, JS160W, JS175W |
Compatibility
According to sources, gear pump 20/950663 is listed for the JS130W, JS145W, JS160W and JS175W wheeled excavators; it mounts on the back of the main pump and is item 17 on the pump diagram. Other parts are in Fuel injection pumps.
Fitting
On first start, slowly run every hydraulic function through its full stroke several times; recheck the oil level and change the hydraulic filter after the first hours of work. Connect the unit's drain line straight to tank, since a blocked or wrongly connected drain soon forces the shaft seal to leak.
Specifications
- Machine systemHydraulic system
- Part typeServo (pilot) pump
- Machine brandJCB
- Manufacturing typeAftermarket
- Machine seriesJS130W, JS145W, JS160W, JS175W
- Additional infoPump gear; mounted on the main pump, item 17
No questions about this product.
