Column switch 701/80298 JCB, genuine

701/80298

Brand
JCB
Article
701/80298
Machine system
Electrics
Part type
Column switch
Machine brand
JCB
Manufacturing type
Original
All the features

In stock

0,00 ₺

We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.

Check the exact specifications and compatibility with your machine with our managers.

We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.

Free delivery to the carrier of your choice, or collect your order in Istanbul.

Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Message on WhatsApp Message on Telegram Call us: +90 531 224 49 66

For the JCB machines: column switch 701/80298, a genuine JCB part. The card also lists 522/05811.

A column switch is a lever switch mounted on the steering column that lets the operator control the main functions without taking a hand off the wheel. Contacts inside the switch open and close the relevant circuits according to the lever position, and it connects to the machine's electrics through a connector at the end of its harness. Worn contacts make a function drop out now and then or fail to respond in one position, while a broken lever or loose mounting leaves the lever position uncertain. Before replacing the switch, check the fuses and relays; if the fault is not there, the switch is replaced. If the return spring weakens, the lever no longer returns to its centre position by itself.

Specifications

Part number	701/80298
Cross / alternative numbers	522/05811
Production type	Original
Part type	Column switch
System / group	Electrics
Machine make	JCB

Compatibility

According to sources, this column switch is used for forward/reverse selection on machines with a Powershift transmission. The catalogue also has the aftermarket version of this part. Other parts are in Switches.

Fitting

After fitting, secure the harness with ties so it does not touch moving parts or hot surfaces, since a chafed wire loses its insulation and causes a short circuit.

Specifications

Machine system
Electrics
Part type
Column switch
Machine brand
JCB
Manufacturing type
Original

Questions: 0

No questions about this product.

07/10/2026 68

JCB 3CX and 4CX wiring diagrams before and after May 2009: sheets and component keys

Section C of the JCB service manual (publication 9803/3290-15) gives the JCB 3CX and 4CX backhoe loader wiring diagram in two versions: one for machines built up to May 2009 with analogue instruments and one for machines from May 2009 with the digital instrument panel. On the earlier machines the main machine circuit takes two sheets, with separate circuits for the gearboxes and options; the later circuit runs to 15 sheets. Below are the main sheets, the component keys and a guide to reading wire numbers.

07/10/2026 37

JCB 3CX / 4CX Electrics: Fuses, Relays, Battery, Alternator and Starter Motor Tests

Section C of the JCB service manual (publication 9803/3290-15) covers the electrical system of JCB 3C, 3CX and 4CX backhoe loaders: fuses and relays, circuit diagrams for machines of different build years, battery, alternator and starter motor testing, the wire numbering system, harness repair, earth points and harness drawings. The PDF has 402 pages, most of them harness drawings.