4WD engagement solenoid valve 25/105100, genuine

25/105100

Brand
JCB
Article
25/105100
Machine system
Transmission
Part type
4WD solenoid valve
Machine brand
JCB
Manufacturing type
Original
Compatibility
JCB 3CX, 4CX
All the features

In stock

0,00 ₺

We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.

Check the exact specifications and compatibility with your machine with our managers.

We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.

Free delivery to the carrier of your choice, or collect your order in Istanbul.

Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Message on WhatsApp Message on Telegram Call us: +90 531 224 49 66

For the JCB 3CX and 4CX backhoe loaders: 4WD engagement solenoid valve 25/105100, a genuine JCB part. The card also lists 25/974100, 25/101000, 460/34600.

The solenoid consists of a cartridge screwed into the transmission casing and the coil on it. Before the change, measure the coil resistance and check the 4WD switch and wiring. Do not remove the solenoid with hot oil, and catch the oil that runs out in a container. Lubricate the new cartridge O-rings with clean transmission oil. After the change, top up the oil and check that 4WD engages and disengages while driving the machine slowly. Driving for long in 4WD on hard, dry ground strains the axle and transmission parts, so 4WD is used only when traction is needed. If 4WD will not engage, check the switch and fuse first, then the solenoid coil.

Specifications

Part number	25/105100
Cross / alternative numbers	25/974100, 25/101000, 460/34600
Manufacturer	JCB
Production type	Original
Part type	4WD solenoid valve
System / group	Transmission
Machine make	JCB

Compatibility

The catalogue also has the aftermarket version of this part. Other parts are in Solenoids and valves.

Fitting

After fitting, secure the harness with ties so it does not touch moving parts or hot surfaces, since a chafed wire loses its insulation and causes a short circuit.

Specifications

Machine system
Transmission
Part type
4WD solenoid valve
Machine brand
JCB
Manufacturing type
Original
Compatibility
JCB 3CX, 4CX

Questions: 0

No questions about this product.

07/10/2026 70

JCB 3CX and 4CX wiring diagrams before and after May 2009: sheets and component keys

Section C of the JCB service manual (publication 9803/3290-15) gives the JCB 3CX and 4CX backhoe loader wiring diagram in two versions: one for machines built up to May 2009 with analogue instruments and one for machines from May 2009 with the digital instrument panel. On the earlier machines the main machine circuit takes two sheets, with separate circuits for the gearboxes and options; the later circuit runs to 15 sheets. Below are the main sheets, the component keys and a guide to reading wire numbers.

07/10/2026 37

JCB 3CX / 4CX Electrics: Fuses, Relays, Battery, Alternator and Starter Motor Tests

Section C of the JCB service manual (publication 9803/3290-15) covers the electrical system of JCB 3C, 3CX and 4CX backhoe loaders: fuses and relays, circuit diagrams for machines of different build years, battery, alternator and starter motor testing, the wire numbering system, harness repair, earth points and harness drawings. The PDF has 402 pages, most of them harness drawings.