Travel pressure switch 20 bar 332/J0671, aftermarket

332/J0671

Brand
JF Parts
Article
332/J0671
Machine system
Sensors
Part type
Pressure switch
Machine brand
JCB
Manufacturing type
Aftermarket
Compatibility
JCB JS200, JS205, JS210, JS220, JS330, JZ235
All the features

In stock

0,00 ₺

We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.

Check the exact specifications and compatibility with your machine with our managers.

We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.

Free delivery to the carrier of your choice, or collect your order in Istanbul.

Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Message on WhatsApp Message on Telegram Call us: +90 531 224 49 66

For the JCB JS crawler excavators: travel pressure switch 20 bar 332/J0671, an aftermarket part. The card also lists 701/80372, 701/80375.

The travel pressure switch senses the pressure in the excavator's travel pilot line and signals the control system when the travel controls are used. According to the product card, this switch is rated 20 bar and listed under the numbers 332/J0671, 701/80372 and 701/80375. The signal can be used to raise engine speed while travelling, for the travel alarm or to control two-speed travel. The switch connects to the harness through the connector on its short lead, and the connector latch and seal must be in place. A faulty switch stops engine speed rising while travelling or disables travel-related warnings.

Specifications

Part number	332/J0671
Cross / alternative numbers	701/80372, 701/80375
Production type	Aftermarket
Part type	Pressure switch
System / group	Sensors
Machine make	JCB

Compatibility

Other parts are in Sensors.

Fitting

Before the change, stop the engine and relieve the pilot circuit pressure by moving the controls a few times. Clean around the switch, remove it and fit the new one with a new seal, tightened to the specified torque. After connecting the plug, start the engine and use the relevant control to check that engine speed rises.

Specifications

Machine system
Sensors
Part type
Pressure switch
Machine brand
JCB
Manufacturing type
Aftermarket
Compatibility
JCB JS200, JS205, JS210, JS220, JS330, JZ235

Questions: 0

No questions about this product.

Useful articles 07/10/2026 23

JCB JS200–JS260 Monitor Messages: What They Mean and What to Check

On JCB JS200, JS210, JS220, JS240 and JS260 tracked excavators with the AMS control system, the monitor in the cab shows the working mode, the time, gauges for oil temperature, coolant temperature and fuel level, and warnings in the message line. Each message first of all points to a real problem: low fuel or coolant, a blocked filter, overheating. But if a message stays on after the cause has been put right, the sensor, wiring or controller is at fault. Below is what each message means and what to check, based on Section C of JCB service manual 9803/6400.

JCB JS200–JS260 07/10/2026 24

JCB JS200–JS260 Electrics and AMS System: Service Manual Section C

Section C of JCB service manual 9803/6400 covers the electrics of the JCB JS200, JS210, JS220, JS240 and JS260 tracked excavators fitted with the AMS (Advanced Management System). AMS is the electronic system that manages the whole machine and replaced CAPS II: it controls engine speed through the throttle stepper motor, pump power, travel speeds, excavator functions, lighting, the wiper, auxiliary circuits and warning lights. The section contains technical data, fuses, control locations, operating logic, self-diagnosis and fault finding by monitor messages. The PDF runs to 98 pages.