Brake proximity sensor 701/80629, aftermarket

701/80629

Brand
VTL
Article
701/80629
Machine system
Sensors
Part type
Brake sensor
Machine brand
JCB
Manufacturing type
Aftermarket
Compatibility
JCB 3CX, 4CX
All the features

In stock

0.00 ₺

We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.

Check the exact specifications and compatibility with your machine with our managers.

We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.

Free delivery to the carrier of your choice, or collect your order in Istanbul.

Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Message on WhatsApp Message on Telegram Call us: +90 531 224 49 66

Brake proximity sensor 701/80629 is an aftermarket part for the JCB 3CX and 4CX backhoe loaders.

The brake proximity sensor is an inductive sensor that detects the brake pedal position without contact. According to sources, 701/80629 is the brake proximity sensor of JCB 3CX and 4CX backhoe loaders and Loadall telehandlers with two jobs: lighting the brake lamps and sending the transmission a declutch signal. Declutch cuts drive when the brake is pressed during loading, so engine power goes to the hydraulics and brake wear is reduced. A faulty sensor leaves the brake lamps dark or permanently lit and stops the transmission declutching, so the machine keeps pushing forward. The product card lists the sensor for Perkins-engined machines; the cable has bare ends.

Specifications

Part number	701/80629
Production type	Aftermarket
Part type	Brake sensor
System / group	Sensors
Machine make	JCB

Compatibility

Other parts are in Sensors.

Fitting

Screw the sensor into the pedal bracket by its threaded body and lock it with two lock nuts, turning the nuts until the signal changes correctly between released and pressed pedal. Connect the wire ends with terminals or a connector and insulate the joints with heat-shrink. After the change, test the brake lamps and the declutch function.

Specifications

Machine system
Sensors
Part type
Brake sensor
Machine brand
JCB
Manufacturing type
Aftermarket
Compatibility
JCB 3CX, 4CX

Questions: 0

No questions about this product.

07/10/2026 67

JCB 3CX and 4CX wiring diagrams before and after May 2009: sheets and component keys

Section C of the JCB service manual (publication 9803/3290-15) gives the JCB 3CX and 4CX backhoe loader wiring diagram in two versions: one for machines built up to May 2009 with analogue instruments and one for machines from May 2009 with the digital instrument panel. On the earlier machines the main machine circuit takes two sheets, with separate circuits for the gearboxes and options; the later circuit runs to 15 sheets. Below are the main sheets, the component keys and a guide to reading wire numbers.

07/10/2026 37

JCB 3CX / 4CX Electrics: Fuses, Relays, Battery, Alternator and Starter Motor Tests

Section C of the JCB service manual (publication 9803/3290-15) covers the electrical system of JCB 3C, 3CX and 4CX backhoe loaders: fuses and relays, circuit diagrams for machines of different build years, battery, alternator and starter motor testing, the wire numbering system, harness repair, earth points and harness drawings. The PDF has 402 pages, most of them harness drawings.