LED beacon LED 20W H123 D157 JCB, aftermarket

For the JCB machines: LED beacon LED 20W H123 D157, an aftermarket part.

According to the product card, this LED beacon is rated 20 W. High-power LED beacons remain clearly visible even in sunlight and dust. The beacon voltage must suit the machine's system; many LED beacons work over a wide voltage range, but check this on the label. Clean the cover with water and a soft cloth rather than solvent, since solvents dull the plastic. On LED beacons the flash pattern can often be selected with a button or wiring connection: rotating, flashing or double flash. Site rules may require a particular pattern, so it is set to suit the place of work. The beacon is chosen with a mounting type (magnetic, bolt-on or pole) that suits the cab roof.

Specifications

Compatibility

According to the product card, its dimensions are: height 123 mm, diameter 157 mm. Other parts are in Beacons.

Fitting

After fitting, switch the beacon on and off to check it works and is visible from every side, routing the cable so it is not trapped by doors or windows and does not touch moving parts. The part comes new; before fitting, compare its part number, voltage and connection type with the old part. After the change, check the function and the warnings on the instrument panel; the connections must be clean, dry and tight.