- BrandCRS
- Article816/80012
- Machine systemTransmission
- Part typeAxle drain plug
- Machine brandJCB
- Manufacturing typeAftermarket
- CompatibilityJCB 3CX, 4CX
- All the features
Axle drain plug (magnetic) 816/80012 is an aftermarket part for the JCB 3CX and 4CX backhoe loaders. This plug is magnetic and collects steel particles from the oil.
The axle and planetary gearbox drain plug closes the hole through which the oil is drained at an oil change. Magnetic plugs collect steel wear particles, stopping them returning to the gears and bearings, and the deposit on the plug at an oil change gives an idea of the axle's internal condition. Fine metal dust is normal, but large pieces or flakes of metal point to gear or bearing damage. Taper-thread plugs seal on their own threads and must not be overtightened.
Specifications
| Part number | 816/80012 |
| Production type | Aftermarket |
| Part type | Axle drain plug |
| System / group | Transmission |
| Machine make | JCB |
Compatibility
According to sources, 816/80012 (816/81012, 826/80012) is a 3/4 BSP magnetic plug used on JCB 3CX, 4CX and 214-217 backhoe loaders. The catalogue also has the genuine version of this part. Other parts are in Rear axle.
Fitting
Remove the plug with the oil warm and inspect the deposit on the magnet before cleaning it. The new plug's thread must be clean; tighten taper plugs to the specified torque and renew the sealing washer on parallel-thread plugs. After filling with oil, check around the plug for leaks. The plug comes new. If the thread in the axle casing is damaged, clean it with a tap; never force a plug into a damaged thread, as the casing can crack. Check the oil level with the machine on level ground.
Specifications
- Machine systemTransmission
- Part typeAxle drain plug
- Machine brandJCB
- Manufacturing typeAftermarket
- CompatibilityJCB 3CX, 4CX
No questions about this product.
