Left bucket side cutter 810-10640 Hidromek, aftermarket

Left bucket side cutter 810-10640 is an aftermarket part for the Hidromek backhoe loaders. According to the product card, this part is a left bucket side cutter.

Side cutter bolts are checked at every service, as a loose cutter ovals its bolt holes and can fall off during work. On rocky ground side cutters wear faster and the check interval is shortened. The cutter is replaced before its wear reaches the bucket side plate. If the bucket side plates are to be repaired by welding, the side cutters are removed first, as welding heat spoils the bolts and softens the cutter. After the repair the holes are cleaned and the cutter refitted with new fixings. Left and right side cutters are specified separately when ordering.

Specifications

Compatibility

According to the product card, the part number is 810-10640. Fit is confirmed by the part number and the adaptor or bucket model. Other parts are in Buckets.

Fitting

Before replacing a wear part, lower the bucket to the ground, stop the machine and support the bucket so that it cannot move. Clean dirt and rust off the mounting faces and holes, seat the new part and tighten the bolts or fit the retainers as the maker specifies. Check the fixing again after the first hours of work.