Planet gear 450/10206 JCB 3CX/4CX, aftermarket

450/10206

Brand
BOYPAR
Article
450/10206
Machine system
Transmission
Part type
Planet gear
Machine brand
JCB
Manufacturing type
Aftermarket
Compatibility
JCB 3CX, 4CX
All the features

In stock

0,00 ₺

We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.

Check the exact specifications and compatibility with your machine with our managers.

We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.

Free delivery to the carrier of your choice, or collect your order in Istanbul.

Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Message on WhatsApp Message on Telegram Call us: +90 531 224 49 66

For the JCB 3CX and 4CX backhoe loaders: planet gear 450/10206, an aftermarket part. This gear is a planet gear of the planetary gearbox.

Because the gears in a planetary gearbox work together, wear is usually found on more than one gear, so the sun gear, planets and annulus are inspected together during a repair. A single new gear running with worn ones is noisy and wears quickly itself. The planet gears' needle bearings and pins are checked in the same repair. Tooth pitting is first noticed as bright particles in the oil.

Specifications

Part number	450/10206
Production type	Aftermarket
Part type	Planet gear
System / group	Transmission
Machine make	JCB

Compatibility

According to sources, 450/10206 is the planet gear of JCB 3CX and 4CX backhoe loaders and part of the hub gear set. The catalogue also has the genuine version of this part. Other parts are in Reduction gears.

Fitting

For the change, remove the wheel, drain the planetary oil and take off the hub carrier. Fit the gears with their pins and bearings the right way round, making sure the sun gear circlip seats properly. Renew the gaskets, tighten the bolts to the specified torque and fill the planetary with the specified oil. The gear comes new; before fitting, check the teeth for burrs or impact marks. Hold the planet gear needles in place with grease during assembly.

Specifications

Machine system
Transmission
Part type
Planet gear
Machine brand
JCB
Manufacturing type
Aftermarket
Compatibility
JCB 3CX, 4CX

Questions: 0

No questions about this product.

JCB 3CX / 4CX 07/10/2026 58

JCB 3CX PD70 rear axle parts breakdown: drawings and part numbers from the JCB catalogue

This article brings together the drawings and parts lists for the PD70 rear axle of the JCB 3CX backhoe loader from the JCB parts catalogue: the complete axle, the axle arm with hub reduction and brake plates, the drive head with brake pistons, the differential and the remote breather. The example is axle 450/44530 with a 15.78:1 ratio and limited slip differential, fitted to 3CX-T machines with front wheel steering (catalogue 9812/0010, serial numbers 00960000–00989999, 01297000–01297999, 01327000–01349999, 01616000–01621599, 01705500–01709999). Part numbers shown as links open the product pages in our catalogue.

Useful articles 07/10/2026 31

JCB 3CX / 4CX Rear Axle Overheating: Causes and What to Check

The rear axle of a JCB 3CX or 4CX backhoe loader runs hotter than the front axle by design: it houses the oil-immersed service brakes, one multi-plate brake pack on each half shaft. A warm axle casing after a shift is therefore normal. It becomes a concern when the axle gets very hot after an ordinary road run, the machine feels as if it is dragging, there is a smell of burnt oil from the axle, or oil starts leaking past the seals. The usual cause is brake drag: the service brakes or the park brake are not releasing fully. Below, based on the JCB service manual, is what to check and in what order.

JCB 3CX / 4CX 07/10/2026 37

JCB 3CX / 4CX Transmission: Gearboxes, Axles, Pressures and Stall Test

Section F of the JCB service manual covers the transmission of the JCB 3C, 3CX and 4CX backhoe loaders: Synchro Shuttle SS700, Powershift PS764 and PS766 gearboxes, torque converter, front and rear axles, propshafts and oil cooler. It contains technical data, gearbox operation and electrics, pressure tests, the torque converter stall test, fault finding tables and removal procedures. This is issue 9803/3290-16 of the manual; the PDF runs to 306 pages.