Differential adjusting nut 450/10403 JCB, aftermarket

450/10403

Brand
ARIES
Article
450/10403
Machine system
Transmission
Part type
Differential adjusting nut
Machine brand
JCB
Manufacturing type
Aftermarket
All the features

In stock

0.00 ₺

We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.

Check the exact specifications and compatibility with your machine with our managers.

We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.

Free delivery to the carrier of your choice, or collect your order in Istanbul.

Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Message on WhatsApp Message on Telegram Call us: +90 531 224 49 66

Differential adjusting nut 450/10403 is an aftermarket part for the JCB machines.

The differential adjusting (side) nut holds the outer races of the differential side bearings in the casing and, when turned, sets both the bearing preload and the backlash between the crown wheel and pinion. If the nut's thread or locking teeth are damaged, the setting cannot be held: the differential moves axially, the backlash changes and the crown wheel and pinion become noisy. The adjusting nuts are therefore always checked during a differential or crown wheel repair.

Specifications

Part number	450/10403
Production type	Aftermarket
Part type	Differential adjusting nut
System / group	Transmission
Machine make	JCB

Compatibility

According to sources, 450/10403 is the toothed adjusting nut on the side of the JCB axle differential. Other parts are in Reduction gears.

Fitting

The nut comes new. Lubricate its thread with clean axle oil when fitting, then set the bearing preload and backlash by measurement to the values in the service manual and lock the nut with its lock plate or pin. Check the contact pattern with marking compound and fill the axle with the specified oil. Turn the adjusting nuts on both sides in step to centre the crown wheel, since adjusting one side only overloads one of the bearings. After adjustment, check the crown wheel run-out with a dial gauge.

Specifications

Machine system
Transmission
Part type
Differential adjusting nut
Machine brand
JCB
Manufacturing type
Aftermarket

Questions: 0

No questions about this product.

JCB 3CX / 4CX 07/10/2026 36

JCB 3CX PD70 rear axle parts breakdown: drawings and part numbers from the JCB catalogue

This article brings together the drawings and parts lists for the PD70 rear axle of the JCB 3CX backhoe loader from the JCB parts catalogue: the complete axle, the axle arm with hub reduction and brake plates, the drive head with brake pistons, the differential and the remote breather. The example is axle 450/44530 with a 15.78:1 ratio and limited slip differential, fitted to 3CX-T machines with front wheel steering (catalogue 9812/0010, serial numbers 00960000–00989999, 01297000–01297999, 01327000–01349999, 01616000–01621599, 01705500–01709999). Part numbers shown as links open the product pages in our catalogue.

Useful articles 07/10/2026 21

JCB 3CX / 4CX Rear Axle Overheating: Causes and What to Check

The rear axle of a JCB 3CX or 4CX backhoe loader runs hotter than the front axle by design: it houses the oil-immersed service brakes, one multi-plate brake pack on each half shaft. A warm axle casing after a shift is therefore normal. It becomes a concern when the axle gets very hot after an ordinary road run, the machine feels as if it is dragging, there is a smell of burnt oil from the axle, or oil starts leaking past the seals. The usual cause is brake drag: the service brakes or the park brake are not releasing fully. Below, based on the JCB service manual, is what to check and in what order.

JCB 3CX / 4CX 07/10/2026 28

JCB 3CX / 4CX Transmission: Gearboxes, Axles, Pressures and Stall Test

Section F of the JCB service manual covers the transmission of the JCB 3C, 3CX and 4CX backhoe loaders: Synchro Shuttle SS700, Powershift PS764 and PS766 gearboxes, torque converter, front and rear axles, propshafts and oil cooler. It contains technical data, gearbox operation and electrics, pressure tests, the torque converter stall test, fault finding tables and removal procedures. This is issue 9803/3290-16 of the manual; the PDF runs to 306 pages.