- Article450/10215
- Machine systemBrake system
- Part typeBrake plate carrier
- Machine brandJCB
- Manufacturing typeOEM
- CompatibilityJCB 3CX, 4CX
- All the features
For the JCB 3CX and 4CX backhoe loaders: brake plate carrier gear 450/10215, an OEM part.
The carrier is inspected when the brake plates are changed and renewed with them if its teeth are stepped or notched. It is chosen by part number with the right spline and tooth count for the axle type. Sources list it as the brake plate carrier used in the axles of backhoe loaders, Loadalls, rough-terrain forklifts and pivot-steer machines. The carrier's splined bore must not have play on the axle shaft.
Specifications
| Part number | 450/10215 |
| Production type | OEM |
| Part type | Brake plate carrier |
| System / group | Brake system |
| Machine make | JCB |
Compatibility
According to sources, 450/10215 is the toothed hub carrying the brake plates in JCB 3CX, 3DX and 4CX backhoe loader and Loadall axles. The catalogue also has the aftermarket version of this part. Other parts are in Rear axle.
Fitting
For the change, open the brake housing and remove the plates. Fit the new carrier on the axle shaft splines, seat its circlip and stack the plates in their original order. Renew the housing gasket and fill the axle with the specified oil. The part comes new. Before fitting, check the axle shaft splines and the inner teeth of the brake plates, since worn plates used with a new carrier cause noisy, uneven braking. After the brake housing is closed, the wheel must turn freely and the brake must release fully when the pedal is let go.
Specifications
- Machine systemBrake system
- Part typeBrake plate carrier
- Machine brandJCB
- Manufacturing typeOEM
- CompatibilityJCB 3CX, 4CX
No questions about this product.
