- BrandJCB
- Article459/10144
- Machine systemTransmission
- Part typeTransmission valve block
- Machine brandJCB
- Manufacturing typeOriginal
- All the features
Transmission valve block 459/10144 is a genuine JCB part for the JCB machines.
The spools and valves in the block work with very small clearances, and wear debris and dirt in the transmission oil are the most common reason they stick. Block repair or replacement is therefore combined with new transmission oil and filter, and if the oil contains metal or friction material from clutch wear, the gearbox is flushed as well. After the block is replaced, if the gearbox has an electronic control unit, the clutch calibration is repeated with the service tool.
Specifications
| Part number | 459/10144 |
| Manufacturer | JCB |
| Production type | Original |
| Part type | Transmission valve block |
| System / group | Transmission |
| Machine make | JCB |
Compatibility
According to the product card, 459/10144 is a transmission valve block. Fit is confirmed by the part number. Other parts are in Transmission.
Fitting
Before the change, make the machine safe, disconnect the battery negative and clean around the block. Mark and unplug the solenoid connectors, remove the block and refit with a new gasket, tightening the bolts in a cross pattern to the specified torque. After assembly, check the oil level, try all directions and gears and measure the clutch pressures with a gauge. In the first hours after the repair, watch the transmission oil temperature and level, and do the first oil and filter change earlier than usual.
Specifications
- Machine systemTransmission
- Part typeTransmission valve block
- Machine brandJCB
- Manufacturing typeOriginal
No questions about this product.
