- Article02/801913
- Machine systemFuel system
- Part typeInjector seal
- Machine brandJCB
- Manufacturing typeAftermarket
- All the features
For the JCB JS crawler excavators: injector seal 02/801913, an aftermarket part.
Renew all the seals whenever the injector is removed, since a copper washer that has been tightened once does not seal as well again. Make sure the old washer is out of the well, as two stacked washers change the injector height and upset the spray pattern.
Specifications
| Part number | 02/801913 |
| Production type | Aftermarket |
| Part type | Injector seal |
| System / group | Fuel system |
| Machine make | JCB |
Compatibility
According to the product card, 02/801913 is an injector seal. Fit is confirmed by the part number. Other parts are in Seals and oil seals.
Fitting
On assembly, clean the injector well, wet the O-rings with clean engine oil and tighten the injector to the specified torque. Bleed the fuel system before starting, then check for gas or fuel leaks around the injector. Dirt or bits of the old seal left in the injector well stop the new seal seating, so the well is carefully cleaned with a vacuum or a clean cloth before the injector goes in. New seals are taken out of their packaging just before fitting.
Specifications
- Machine systemFuel system
- Part typeInjector seal
- Machine brandJCB
- Manufacturing typeAftermarket
No questions about this product.
