- ArticleJRA0218
- Machine systemUndercarriage
- Part typeTrack adjuster seal
- Machine brandJCB
- Manufacturing typeAftermarket
- All the features
Idler tensioner seal JRA0218 is an aftermarket part for the JCB JS crawler excavators. According to the product card, this seal is used in the idler tensioner; the card also lists JRA0224 and JSA0059.
The track adjuster pushes the idler forward to set the track tension: as grease is pumped into the cylinder the piston extends and the track tightens. The adjuster seal holds the grease under pressure between the cylinder and piston. When it fails, grease escapes, the track gradually slackens, the chain can come off the rollers and the undercarriage parts wear quickly.
Specifications
| Part number | JRA0218 |
| Production type | Aftermarket |
| Part type | Track adjuster seal |
| System / group | Undercarriage |
| Machine make | JCB |
Compatibility
According to sources, JRA-series seals are track adjuster seals of JCB JS130, JS160, JS200, JS220 and similar JS crawler excavators. Other parts are in Seals and oil seals.
Fitting
Before the change, release the pressure by slowly loosening the grease valve, never removing it completely. Fit the seals lubricated with clean grease, then pump in grease after assembly and set the track tension to the sag given in the manual. Tension is measured after driving the machine a few metres back and forth on level ground; an over-tight track strains the rollers and travel gearbox.
Specifications
- Machine systemUndercarriage
- Part typeTrack adjuster seal
- Machine brandJCB
- Manufacturing typeAftermarket
No questions about this product.
