- Article811/50568
- Machine systemHydraulic system
- Part typePin
- Machine brandJCB
- Manufacturing typeAftermarket
- CompatibilityJCB 3CX, 4CX
- All the features
For the JCB 3CX and 4CX backhoe loaders: dipper ram pin 811/50568, an aftermarket part. According to the product card, this part is a dipper ram pin.
Pins are made of steel with a hardened, ground surface, which gives wear resistance under heavy shock loads. When a pin is replaced, the ovality of the eyes is measured too: if the eyes are worn, replacing only the pin and bush will not remove the play and the eyes need repairing.
Specifications
| Part number | 811/50568 |
| Production type | Aftermarket |
| Part type | Pin |
| System / group | Hydraulic system |
| Machine make | JCB |
Compatibility
According to the product card, 811/50568 is a pin. The card also lists 811/50519. Fit is confirmed by the part number. Other parts are in JCB CX series pins.
Fitting
Before the change, lower the attachment to the ground or support it securely, stop the engine and release the hydraulic pressure. Remove the locking element and drift the pin out with a suitable punch without damaging the eyes. After cleaning and checking the eye and bush, fit the new pin greased, refit the locking element and grease the joint until clean grease comes out.
Specifications
- Machine systemHydraulic system
- Part typePin
- Machine brandJCB
- Manufacturing typeAftermarket
- CompatibilityJCB 3CX, 4CX
No questions about this product.
