- Article1019/2019
- Machine systemHydraulic system
- Part typePin
- Machine brandJCB
- Manufacturing typeAftermarket
- CompatibilityJCB 3CX, 4CX
- All the features
Hydraulic ram pin 1019/2019 is an aftermarket part for the JCB 3CX and 4CX backhoe loaders. According to the product card, this part is a hydraulic ram pin.
Pin life depends largely on greasing: bucket and dipper pins are greased daily and other joints at the maker's intervals. Pump in grease until it pushes out the old grease and dirt. A pin with a blocked grease channel runs dry and can wear out in a few days, so the grease nipples are checked regularly too.
Specifications
| Part number | 1019/2019 |
| Production type | Aftermarket |
| Part type | Pin |
| System / group | Hydraulic system |
| Machine make | JCB |
Compatibility
According to the product card, 1019/2019 is a pin. Fit is confirmed by the part number. Other parts are in JCB CX series pins.
Fitting
Before the change, lower the attachment to the ground or support it securely, stop the engine and release the hydraulic pressure. Remove the locking element and drift the pin out with a suitable punch without damaging the eyes. After cleaning and checking the eye and bush, fit the new pin greased, refit the locking element and grease the joint until clean grease comes out.
Specifications
- Machine systemHydraulic system
- Part typePin
- Machine brandJCB
- Manufacturing typeAftermarket
- CompatibilityJCB 3CX, 4CX
No questions about this product.
