Fuel filter 332/G0652 JCB JS, genuine

Fuel filter 332/G0652 is a genuine JCB part for the JCB JS crawler excavators.

After changing the fuel filter it is important to bleed the air from the system, since air left in the line stops the engine starting or makes it stall after starting. Open the bleed screw on the filter head or pump and operate the hand primer until no more bubbles appear. In winter, waxing fuel can block the filter quickly, so winter-grade fuel is used in cold climates and the filter changed more often if needed.

Specifications

Compatibility

According to sources, 332/G0652 is the fuel filter element used on JCB JS175W to JS370 and JZ235 excavators, and 332/G1864 is the (tall) assembly of this filter with its head. The catalogue also has the aftermarket version (option 1), aftermarket version (option 2), aftermarket version (assembly 332/G1864) and genuine version of this part. Other parts are in Genuine JCB filters.

Fitting

Before the change, stop the engine and clean around the filter. Remove the old filter and wipe the seal face of the filter head. Lightly lubricate the new filter's seal with clean fuel, screw the filter on by hand and, once the seal touches, tighten it by the amount the maker specifies; overtightening with a wrench crushes the seal and makes removal hard. Then bleed the fuel system with the hand primer or the method in the manual, start the engine and check for leaks. Clean hands and tools matter when changing a fuel filter, since dirt on the filter head can reach the clean side of the new filter. Do not overtighten the bleed screw on the filter head.