Transmission solenoid valve 25/220804, OEM HydraForce

459/M2874

Transmission solenoid valve 25/220804 JCB, OEM HydraForce

Brand
Hydra Force
Article
459/M2874
Machine system
Transmission
Part type
Transmission solenoid
Machine brand
JCB
Manufacturing type
OEM
All the features

In stock

0.00 ₺

We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.

Check the exact specifications and compatibility with your machine with our managers.

We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.

Free delivery to the carrier of your choice, or collect your order in Istanbul.

Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Message on WhatsApp Message on Telegram Call us: +90 531 224 49 66

For the JCB machines: transmission solenoid valve 25/220804, an OEM part made by HydraForce. The card also lists 459/M2874.

The cartridge O-rings seal it in the control valve body; before fitting a new solenoid, lubricate the O-rings with clean transmission oil and push the cartridge into its cavity by hand without tilting. Tighten the cartridge to the specified torque, since an overtightened cartridge body can distort and stick. Contaminated transmission oil is the most common cause of cartridge failure, so check the transmission oil filter as well when changing a solenoid. Try every gear and direction after the change. The OEM solenoid is made by the cartridge valve maker and has the same cavity size as the originally fitted valve, with the same coil connector type.

Specifications

Part number	25/220804
Cross / alternative numbers	459/M2874
Manufacturer	HydraForce
Production type	OEM
Part type	Transmission solenoid
System / group	Transmission
Machine make	JCB

Compatibility

The catalogue also has the aftermarket version and genuine version of this part. Other parts are in Solenoids and valves.

Fitting

After fitting, secure the harness with ties so it does not touch moving parts or hot surfaces, since a chafed wire loses its insulation and causes a short circuit.

Specifications

Machine system
Transmission
Part type
Transmission solenoid
Machine brand
JCB
Manufacturing type
OEM

Questions: 0

No questions about this product.

07/10/2026 64

JCB 3CX and 4CX wiring diagrams before and after May 2009: sheets and component keys

Section C of the JCB service manual (publication 9803/3290-15) gives the JCB 3CX and 4CX backhoe loader wiring diagram in two versions: one for machines built up to May 2009 with analogue instruments and one for machines from May 2009 with the digital instrument panel. On the earlier machines the main machine circuit takes two sheets, with separate circuits for the gearboxes and options; the later circuit runs to 15 sheets. Below are the main sheets, the component keys and a guide to reading wire numbers.

07/10/2026 37

JCB 3CX / 4CX Electrics: Fuses, Relays, Battery, Alternator and Starter Motor Tests

Section C of the JCB service manual (publication 9803/3290-15) covers the electrical system of JCB 3C, 3CX and 4CX backhoe loaders: fuses and relays, circuit diagrams for machines of different build years, battery, alternator and starter motor testing, the wire numbering system, harness repair, earth points and harness drawings. The PDF has 402 pages, most of them harness drawings.