Cab switch 701/E0032 JCB, aftermarket

701/E0032

Article
701/E0032
Machine system
Cab
Part type
Cab switch
Machine brand
JCB
Manufacturing type
Aftermarket
All the features

In stock

0.00 ₺

We do not publish prices: they depend on exchange rates and change often. Click «Request price» and we will quote the current price on the day you ask.

Check the exact specifications and compatibility with your machine with our managers.

We are available Monday to Saturday, 9:00 – 18:00; closed on Sunday.

Free delivery to the carrier of your choice, or collect your order in Istanbul.

Could not find the part you need? Write to us and we will help you find an alternative or order it from the manufacturer.

Message on WhatsApp Message on Telegram Call us: +90 531 224 49 66

Cab switch 701/E0032 is an aftermarket part for the JCB machines.

This part is a rocker switch used on the cab panel of JCB machines, listed in the product card by part number. Its function depends on the symbol on the key cap fitted to it and the machine's equipment. The body clips into the panel hole by its side clips, and the pins at the back plug into the harness connector. A worn switch makes the function cut out now and then or sticks in one position, and the switch is chosen so its pin layout matches the old one. The product card lists this switch by part number only, so its function is confirmed from the old switch's position and the symbol on its cap. The switch comes new.

Specifications

Part number	701/E0032
Production type	Aftermarket
Part type	Cab switch
System / group	Cab
Machine make	JCB

Compatibility

Other parts are in Rocker switches.

Fitting

Do not wipe cab switches with wet cloths or solvents, since liquid seeps inside and oxidises the contacts. The switch is chosen by part number and its pin layout compared with the old one. If the pins at the back are darkened or melted, check the harness connector too, since a faulty connector will heat the new switch as well. After the change, test the function in every position. Rocker switches are held in the panel by their side clips, and a switch with broken clips can be pushed into the panel when used.

Specifications

Machine system
Cab
Part type
Cab switch
Machine brand
JCB
Manufacturing type
Aftermarket

Questions: 0

No questions about this product.

07/10/2026 67

JCB 3CX and 4CX wiring diagrams before and after May 2009: sheets and component keys

Section C of the JCB service manual (publication 9803/3290-15) gives the JCB 3CX and 4CX backhoe loader wiring diagram in two versions: one for machines built up to May 2009 with analogue instruments and one for machines from May 2009 with the digital instrument panel. On the earlier machines the main machine circuit takes two sheets, with separate circuits for the gearboxes and options; the later circuit runs to 15 sheets. Below are the main sheets, the component keys and a guide to reading wire numbers.

07/10/2026 37

JCB 3CX / 4CX Electrics: Fuses, Relays, Battery, Alternator and Starter Motor Tests

Section C of the JCB service manual (publication 9803/3290-15) covers the electrical system of JCB 3C, 3CX and 4CX backhoe loaders: fuses and relays, circuit diagrams for machines of different build years, battery, alternator and starter motor testing, the wire numbering system, harness repair, earth points and harness drawings. The PDF has 402 pages, most of them harness drawings.