Rear lamp, right 700/50129 JCB, aftermarket

For the JCB machines: rear lamp, right 700/50129, an aftermarket part.

This rear lamp is for the right rear of the machine; the photo shows a red section at the top, amber in the middle and clear at the bottom. The clear section is the reversing lamp, lighting the area behind and showing others that the machine is reversing. The product card lists it as the right rear lamp, number 700/50129. It has the same body size as the left-hand lamp but a different section layout, so the sides are not mixed up. The bulbs are chosen for the wattage and voltage of their holders.

Specifications

Compatibility

Other parts are in Lighting.

Fitting

Bolt the lamp to its bracket without cracking the body or lens. Make the connector or wire joints clean and dry and check that the earth is secure. After reconnecting the battery, test every function of the lamp and adjust the beam direction if needed. When choosing the lamp, compare the voltage (12 V or 24 V), bulb type, side and mounting points with the old one. The body seal must be in place, otherwise condensation forms inside and the reflector soon dulls. Clean the lens with water and a soft cloth, not solvent.