- BrandTimken
- Article907/50100
- Machine systemTransmission
- Part typeDifferential taper bearing
- Machine brandJCB
- Manufacturing typeAftermarket
- CompatibilityJCB 3CX, 4CX
- All the features
For the JCB 3CX and 4CX backhoe loaders: differential taper bearing 907/50100, an aftermarket part. This bearing is the taper roller side bearing supporting the differential casing.
The bearings inside an axle usually wear together, so when one has failed the other bearings, seals and gears in that assembly are checked too. Replacing a bearing on its own is no lasting fix if it will run with a worn gear or shaft seat. During service also check that the axle breather is clean, since a blocked breather builds pressure in the axle and pushes oil out past the seals.
Specifications
| Part number | 907/50100 |
| Production type | Aftermarket |
| Part type | Differential taper bearing |
| System / group | Transmission |
| Machine make | JCB |
Compatibility
According to sources, 907/50100 is a 387A/382 taper roller bearing (57 x 95 mm) used as the differential side bearing of JCB backhoe loaders such as the 3CX. The catalogue also has the aftermarket version (option 2), aftermarket version (option 3) and OEM version of this part. Other parts are in Bearings.
Fitting
When the old bearing is removed, check the housing and shaft seat for burrs, rust and wear, since a worn seat lets the new bearing spin. Renew the seals and O-rings next to the bearing too. When the axle oil is drained, look at the metal particles in it: a lot of particles suggests the gears may also be worn.
Specifications
- Machine systemTransmission
- Part typeDifferential taper bearing
- Machine brandJCB
- Manufacturing typeAftermarket
- CompatibilityJCB 3CX, 4CX
No questions about this product.
