Differential taper bearing 907/50100, aftermarket, option 2

Differential taper bearing 907/50100 is an aftermarket part for the JCB 3CX and 4CX backhoe loaders. This bearing is the taper roller side bearing supporting the differential casing.

A bearing's load capacity and dimensional accuracy are defined by its standard designation (for example the cone and cup numbers of taper roller bearings), which helps confirm that it suits its position in the axle. Bearings are stored dry, clean and lying flat. A bearing with rust marks, dents or cage damage is never fitted.

Specifications

Compatibility

According to sources, 907/50100 is a 387A/382 taper roller bearing (57 x 95 mm) used as the differential side bearing of JCB backhoe loaders such as the 3CX. The catalogue also has the aftermarket version (option 1), aftermarket version (option 3) and OEM version of this part. Other parts are in Bearings.

Fitting

When the old bearing is removed, check the housing and shaft seat for burrs, rust and wear, since a worn seat lets the new bearing spin. Renew the seals and O-rings next to the bearing too. When the axle oil is drained, look at the metal particles in it: a lot of particles suggests the gears may also be worn.