- BrandMULTI
- Article47703
- Machine systemTransmission
- Part typeOil seal
- Machine brandVarious brands
- Manufacturing typeAftermarket
- CompatibilityCarraro
- Machine seriesVarious models
- All the features
For the backhoe loaders with Carraro axles: oil seal 47703, an aftermarket part.
Seals are defined by inside and outside diameter, width and lip type (single lip, with dust lip, cassette), and since seals of the same size come in different designs, the choice is made by part number. When changing a seal, check the shaft surface under the lip, since a groove worn there will soon make the new seal leak too, and the shaft or a wear sleeve must then be replaced.
Specifications
| Part number | 47703 |
| Production type | Aftermarket |
| Part type | Oil seal |
| System / group | Transmission |
Compatibility
According to the product card, Carraro 47703 is an oil seal; cross numbers: CA0047703. Fit is confirmed by the axle or transmission type. Other parts are in Carraro.
Fitting
Clean the bore, lubricate the seal's outer surface and lip with clean oil and drive it squarely into place with a mandrel of suitable diameter, since a cocked seal leaks from the first run. Watch the direction: the spring-loaded lip faces the oil. After assembly, check the oil level and look for leaks after the first hours of work.
Specifications
- Machine systemTransmission
- Part typeOil seal
- Machine brandVarious brands
- Manufacturing typeAftermarket
- CompatibilityCarraro
- Machine seriesVarious models
No questions about this product.
%20(253-5021)%20А_УТ-00003031-220x230.jpg "Oil seal 140368 Carraro, aftermarket")
_УТ-00001739-220x230.jpg "Axle bearing 27351 Carraro, aftermarket")
%20А_УТ-00001873-220x230.jpg "Planet gear 138736 Carraro, aftermarket")
