- BrandBOYPAR
- Article450/10215
- Machine systemBrake system
- Part typeBrake plate carrier
- Machine brandJCB
- Manufacturing typeAftermarket
- CompatibilityJCB 3CX, 4CX
- All the features
Brake plate carrier gear 450/10215 is an aftermarket part for the JCB 3CX and 4CX backhoe loaders.
The brake plate carrier is a toothed hub that turns on the axle shaft splines and carries the brake friction plates on its outer teeth. When the brake piston squeezes the plates, the braking torque passes through this part to the axle shaft. On a carrier with worn teeth the plates run with play, braking causes knocking and vibration, and the plates' inner teeth wear quickly too. The plates' inner teeth and the carrier's teeth wear together, so they are assessed in the same repair.
Specifications
| Part number | 450/10215 |
| Production type | Aftermarket |
| Part type | Brake plate carrier |
| System / group | Brake system |
| Machine make | JCB |
Compatibility
According to sources, 450/10215 is the toothed hub carrying the brake plates in JCB 3CX, 3DX and 4CX backhoe loader and Loadall axles. The catalogue also has the OEM version of this part. Other parts are in Rear axle.
Fitting
For the change, open the brake housing and remove the plates. Fit the new carrier on the axle shaft splines, seat its circlip and stack the plates in their original order. Renew the housing gasket and fill the axle with the specified oil. The part comes new. Before fitting, check the axle shaft splines and the inner teeth of the brake plates, since worn plates used with a new carrier cause noisy, uneven braking. After the brake housing is closed, the wheel must turn freely and the brake must release fully when the pedal is let go.
Specifications
- Machine systemBrake system
- Part typeBrake plate carrier
- Machine brandJCB
- Manufacturing typeAftermarket
- CompatibilityJCB 3CX, 4CX
No questions about this product.
