- BrandBOYPAR
- Article450/18204
- Machine systemBrake system
- Part typeAxle brake part
- Machine brandJCB
- Manufacturing typeAftermarket
- CompatibilityJCB 3CX, 4CX
- All the features
For the JCB 3CX and 4CX backhoe loaders: brake back-off kit 450/18204, an aftermarket part. This kit contains the back-off pin, the return spring and the flanged bush.
The brake piston must return evenly all round, so all the pins, springs and bushes in an axle are replaced at the same time and of the same type. Renewing only one set can make the piston return unevenly and the discs rub on one side. The parts are chosen by part number to suit the axle type and brake housing.
Specifications
| Part number | 450/18204 |
| Production type | Aftermarket |
| Part type | Axle brake part |
| System / group | Brake system |
| Machine make | JCB |
Compatibility
According to sources, 450/18204 (brake back-off pin), 814/00365 (compression spring) and 448/16905 (flanged bush) are used together in the axle brakes of JCB backhoe loaders and telehandlers and are also sold as a brake tension kit. The catalogue also has the aftermarket version (guide bush 448/16905), genuine version (guide bush 448/16905), aftermarket version (return spring 814/00365) and genuine version (back-off pin 450/18204) of this part. Other parts are in Rear axle.
Fitting
The parts come new. The change is made with the axle oil drained and the brake housing opened; fit the pins, springs and bushes in the same order and check that the piston returns freely. Renew the housing gasket, fill the axle with the specified oil to level and test the brakes at low speed.
Specifications
- Machine systemBrake system
- Part typeAxle brake part
- Machine brandJCB
- Manufacturing typeAftermarket
- CompatibilityJCB 3CX, 4CX
No questions about this product.
