5CX 16.9-28 (15x28), +36 mm wheel rim 334/L2032 JCB, aftermarket

For the JCB machines: 5CX 16.9-28 (15x28), +36 mm wheel rim 334/L2032, an aftermarket part. According to the product card, this part is a wheel rim (5CX 16.9-28 (15x28), +36 mm).

The rim is chosen by part number according to machine model, axle type and tyre size, and front and rear rims often differ. Rims that are cracked, distorted or have oval bolt holes are not used. The tyre is fitted to the rim with tyre-fitting equipment and a safety cage, and the inflation pressure is set to the tyre maker's value. The tyre seats and flanges of the rim are checked for rust and impact marks, as a rusty seat lets air escape from tubeless tyres. Damaged rim paint is cleaned and restored so that corrosion does not spread. When the rim is replaced, the wheel studs and nuts are checked too. The rim size is checked against the markings on the tyre sidewall so that the tyre seats properly.

Specifications

Compatibility

According to the product card, the part number is 334/L2032. The card also lists 41/910200, 334/L2024, 334/L2025, 41/912100, 41/940376, 334/D5741. Fit is confirmed by the part number and the machine serial number. The catalogue also has the aftermarket version of this part. Other parts are in Wheel rims.

Fitting

After the wheel is fitted, tighten the nuts in a cross pattern to the specified torque and check them again after the first hours of work.