16.9-24 (14x24), offset 45 wheel rim 401/C4306 JCB, genuine

16.9-24 (14x24), offset 45 wheel rim 401/C4306 is a genuine JCB part for the JCB machines. According to the product card, this part is a wheel rim (16.9-24 (14x24), offset 45).

The wheel rim carries the tyre and transfers the machine's weight and tractive forces to the axle. A rim is defined by width and diameter (for example 14x24), tyre size (for example 16.9-24), offset and the bolt hole pattern. Offset sets the wheel's position relative to the hub, and a rim with the wrong offset changes the track width, makes the tyre rub on the mudguard or chassis and overloads the axle bearings. The tyre seats and flanges of the rim are checked for rust and impact marks, as a rusty seat lets air escape from tubeless tyres. Damaged rim paint is cleaned and restored so that corrosion does not spread. When the rim is replaced, the wheel studs and nuts are checked too. The rim size is checked against the markings on the tyre sidewall so that the tyre seats properly.

Specifications

Compatibility

According to the product card, the part number is 401/C4306. Fit is confirmed by the part number and the machine serial number. Other parts are in Wheel rims.

Fitting

After the wheel is fitted, tighten the nuts in a cross pattern to the specified torque and check them again after the first hours of work.