- BrandJF Parts
- Article819/00100
- Machine systemVarious systems
- Part typeShim washer
- Machine brandJCB
- Manufacturing typeAftermarket
- All the features
For the JCB machines: 60x120x1.4 mm pin shim washer 819/00100, an aftermarket part. According to the product card, this part is a pin shim washer, size 60x120x1.4 mm.
Shim washers are chosen by pin diameter (inside diameter), outside diameter and thickness. The clearance is measured with feeler gauges or a caliper before the pin is removed and the total shim thickness is set from it; thin shims allow precise adjustment. The inside diameter must fit the pin closely, or the shim will move on the pin and wear at the edge.
Specifications
| Part number | 819/00100 |
| Production type | Aftermarket |
| Part type | Shim washer |
| Machine make | JCB |
Compatibility
According to the product card, the part number is 819/00100. The card also lists 334/Y2667. Fit is confirmed by the part number. The catalogue also has the aftermarket version of this part. Other parts are in Washers.
Fitting
Before fitting the washer, clean the seating faces and remove burrs and old seal remains. Fit the washer the right way round and tighten the joint to the specified torque. Copper and aluminium sealing washers that have been removed are not reused; new ones are fitted.
Specifications
- Machine systemVarious systems
- Part typeShim washer
- Machine brandJCB
- Manufacturing typeAftermarket
No questions about this product.
